कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Two-Current Separator Rocking Churn: An Oval Cistern Split Round a Separator, the Currents Collide at Each Tip
YourGrandma

सिर्जनाकर्ता

YourGrandma

7. अक्टोबर 2026IS
१६
०
०
०
०

Two-Current Separator Rocking Churn: An Oval Cistern Split Round a Separator, the Currents Collide at Each Tip

Daniel E. True of Lake Village, New Hampshire, received US 18,165, dated 8 September 1857, for a rocking churn whose oval cistern has a "separator" of the same shape in its middle, so the cream flows in two currents that "come in direct collision from opposite directions, at each tip." This rung prints the cistern and the separator lid, builds the swing seat and makes butter.
शुरुआती
About 3 hours, plus printing

निर्देशनहरू

1

His sizes at one third

Jupyter नोटबुक लोड हुँदैछ…
2

A rocking churn he names

True names McLaughlin's and Enoch Thomas's patents and does not claim their grates; he claims the separator.
3

Read US 18,165

"The operation being accomplished by oscillating the swing seat C, which gives to the cream cistern a successive tip motion, Fig. 1, red lines, thereby causing the cream to flow rapidly, being divided by the separator, into two separate currents in its passage, which come in contact at their terminus, alternately, whereby the cream receives a violent and peculiar action which causes a speedy union of the particles of butter into one mass."
4

Print the parts

Print the oval cistern (/uploads/blueprints/two-current-separator-rocking-churn-cistern.stl) and the lid with its separator (/uploads/blueprints/two-current-separator-rocking-churn-separator-lid.stl). The cistern needs a bed at least 210 mm long. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

यस चरणका सामग्री:

PETG फिलामेन्टPETG फिलामेन्ट1 टुक्रा

चाहिने औजार:

फिलामेन्ट चल्ने 3D प्रिन्टर (FDM)फिलामेन्ट चल्ने 3D प्रिन्टर (FDM)
5

Frame and swing seat

Build a pine frame about 220 mm high and hang a pine seat between its uprights on a 10 mm rod, with two side strips that enter the cistern's guides. Hang a steel rod from the seat's middle with a stack of nuts as the pendulum weight.

यस चरणका सामग्री:

सल्लाको फल्याकसल्लाको फल्याक1 टुक्रा
नरम फलामको गोलो डण्डीनरम फलामको गोलो डण्डी1 टुक्रा
छपत्रे नटछपत्रे नट6 टुक्रा
काठको पेच #8 × १"काठको पेच #8 × १"1 टुक्रा

चाहिने औजार:

हाते आराहाते आरा
तारविनाको ड्रिलतारविनाको ड्रिल
ड्रिल टुप्पाको सेटड्रिल टुप्पाको सेट
स्क्रुड्राइभर सेटस्क्रुड्राइभर सेट
6

Corks

Plug the lid's two ventilators and the cistern's outlet with corks.

यस चरणका सामग्री:

कर्ककर्क3 टुक्रा
7

The patent drawing

US 18,165 drawing sheet, public domain (expired patent).
चरण 7 - Image 1
8

Rock and churn

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 600 ml and fit the lid with its separator. Rock the seat end to end steadily; time until the butter comes. Draw off the buttermilk at the outlet. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

यस चरणका सामग्री:

बाक्लो मलाईबाक्लो मलाई600 मिलि
मोटो समुद्री नुनमोटो समुद्री नुन1 टुक्रा
पानीपानी1 टुक्रा

चाहिने औजार:

भित्रै छाडिने प्रोब थर्मोमिटरभित्रै छाडिने प्रोब थर्मोमिटर
रोकघडीरोकघडी
डिजिटल भान्साको तराजुडिजिटल भान्साको तराजु
स्टेनलेस स्टिलको ठूलो मिसाउने कचौरास्टेनलेस स्टिलको ठूलो मिसाउने कचौरा
9

Troubleshooting

Two-current churn troubleshooting.

Flow

Loading...
10

History and honest limits

**Daniel E. True** of Lake Village, Belknap County, New Hampshire, US 18,165, 8 September 1857. His frame was 2 feet high. He wrote that grate and perforated dashers were not new, naming Enoch Thomas's and John McLaughlin's patents, and claimed the separator in rocking churns. A printed cistern at one third of his size, pine and nuts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn.

सामग्री

9
  • प्लेसहोल्डर
  • प्लेसहोल्डर
  • प्लेसहोल्डर
  • 6 टुक्रा
    प्लेसहोल्डर
  • प्लेसहोल्डर
  • 3 टुक्रा
    प्लेसहोल्डर
  • प्लेसहोल्डर
  • प्लेसहोल्डर
  • 1 टुक्रा
    प्लेसहोल्डर

आवश्यक उपकरणहरू

9

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...