सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने

Easter Egg Dyeing Stand: a Crank-Turned Rubber Roller Spins the Egg Under the Brush (Young, 1943)
Raymond P. Young of Wrightsville, Pennsylvania, received US 2,327,754, dated 24 August 1943, for a little table for dyeing Easter eggs. The egg sits in an oval opening on a rubber roller turned by a crank; hold a dye brush against it and the colour goes on evenly all round. Grooves hold the brushes, a rack holds the dye bottles, and a rabbit stands at one end.
We make it from plywood and dowel. All sizes are ours.
शुरुआती
About 4 hours
निर्देशनहरू
1
1
Opening and roll
Opening and roll
Jupyter नोटबुक लोड हुँदैछ…
2
2
Read US 2,327,754
Read US 2,327,754
"If a dye containing brush is held against the object 8, application of the dye to the object 8 will take place uniformly and in a convenient manner."
3
3
Cut the platform
Cut the platform
Cut a platform of 12 mm plywood about 300 x 180 mm (ours). Near one corner cut an oval opening 70 x 40 mm with a coping saw, his opening 6. Glue a strip of thin plywood or a ring of dowel round it to make the rise 7, so the egg cannot roll off.
यस चरणका सामग्री:
प्लाइउडको पाता1 टुक्रा
काठको गोन्द1 टुक्राचाहिने औजार:
सिसाकलम
हाते आरा
हाते ड्रिल
वक्र काट्ने आरा
गिट्टी कागज4
4
Make the brush grooves
Make the brush grooves
Glue short dowels across the top of the platform beside the opening, a little apart, so the gaps between them (his ribs 10 and grooves 11) hold the brushes.
यस चरणका सामग्री:
कडा काठका किला1 टुक्रा
काठको गोन्द1 टुक्राचाहिने औजार:
हाते आरा
गिट्टी कागज5
5
Fit the legs
Fit the legs
Drill the corners and glue in four dowel legs, his legs 9, long enough to clear the crank below (ours).
यस चरणका सामग्री:
कडा काठका किला1 टुक्रा
काठको गोन्द1 टुक्राचाहिने औजार:
हाते ड्रिल
हाते आरा6
6
Make the roller
Make the roller
Slide rubber tubing over a steel rod for the roll 24 (his roll is rubber, "or any other suitable material"). Bend the rod's long end twice at right angles in the vice to make the crank handle 25.
यस चरणका सामग्री:
रबरको नली1 टुक्रा
नरम फलामको गोलो डण्डी1 टुक्राचाहिने औजार:
बेन्चको भाइस
फलाम काट्ने आरा7
7
Hang the roller
Hang the roller
Cut two bearing brackets from flat bar (ours, his bearings 21 and 22), drill each for the rod at the depth the notebook gives, bend them to hang below the platform and screw them on either side of the opening, so the roll sits under the opening as his Fig. 4. The egg should rest on the roll inside the rise and turn when the crank turns.
यस चरणका सामग्री:
नरम इस्पातको चेप्टो पाटो1 टुक्रा
काठका पेच1 टुक्राचाहिने औजार:
फलाम काट्ने आरा
खम्बा भएको ड्रिल
ड्रिल टुप्पाको सेट
बेन्चको भाइस
स्क्रुड्राइभर सेट8
8
Make the bottle rack
Make the bottle rack
Bend a strip of flat bar (his rack bar 14, "preferably strap iron") down and out at each end, drill a row of holes in it to hold the dye bottles, and screw its ends to the back edge of the platform.
यस चरणका सामग्री:
नरम इस्पातको चेप्टो पाटो1 टुक्रा
काठका पेच1 टुक्राचाहिने औजार:
फलाम काट्ने आरा
खम्बा भएको ड्रिल
ड्रिल टुप्पाको सेट
बेन्चको भाइस
स्क्रुड्राइभर सेट9
9
Add the rabbit
Add the rabbit
Cut a rabbit from plywood with the coping saw, sand it and glue it upright at the far end, his figure 13.
यस चरणका सामग्री:
प्लाइउडको पाता1 टुक्रा
काठको गोन्द1 टुक्राचाहिने औजार:
वक्र काट्ने आरा
गिट्टी कागज10
10
Dye an egg
Dye an egg
Fill the bottles with food colouring (ours) and put them in the rack. Set a hard-boiled egg in the opening on the roll, turn the crank, and hold a dye-filled brush against the egg: the colour goes on in an even band. Move the brush across to stripe it.
यस चरणका सामग्री:
अण्डा1 टुक्रा
खानेकुराको रङ1 टुक्रा
बिर्कोसहितका सिसाका बोतल1 टुक्राचाहिने औजार:
बुरुसको सेट11
11
Troubleshooting
Troubleshooting
Egg dyeing stand troubleshooting.
Flow
Loading...
12
12
History and honest limits
History and honest limits
**Raymond P. Young** of Wrightsville, Pennsylvania, US 2,327,754, dated 24 August 1943, filed 27 May 1942. He claimed "dyeing apparatus comprising a platform having an opening therein, a rotatable roller mounted at the underside of the platform and partly protruding into said opening, means for rotating the roller, and an upstanding article confining wall on the platform surrounding said opening". He gives no sizes or dye: the plywood, dowels, all sizes, the bracket bearings, the rubber tube on a rod, and food colouring are ours.
सामग्री
10- 1 टुक्राप्लेसहोल्डर
- 4 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
आवश्यक उपकरणहरू
11- 1 vendor sell this, none ship to you yetप्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
यो खाकाले बनाउँछ
सम्बन्धित ब्लुप्रिन्ट
यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।


