कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Metal Oxide Varistor: Zinc Oxide with Manganese and Antimony Oxides, Bismuth Paste Fired On (Masuyama 1972, Ex. 6)
Ed

सिर्जनाकर्ता

Ed

28. अक्टोबर 2026FI
२
०
०
०
०

Metal Oxide Varistor: Zinc Oxide with Manganese and Antimony Oxides, Bismuth Paste Fired On (Masuyama 1972, Ex. 6)

A varistor with manganese dioxide and antimony trioxide mixed into the zinc oxide, and bismuth oxide fired on from a paste: 99.0 % zinc oxide, 0.5 % manganese dioxide and 0.5 % antimony trioxide by moles, sintered at 1350 °C, coated with bismuth oxide paste and fired at 800 °C. The disc measured a C-value of 190 at 1 mA and a nonlinearity exponent n of 34.5. Source: T. Masuyama, M. Matsuoka and T. Nishi (Matsushita), US 3,663,458 (1972), Example 6. Unknown: how the aluminium is sprayed on, what the silver paint is, and how strong the epoxy solution of the paste is. The 10 g batch is our arithmetic. Picture: the patent's drawing.
उन्नत
2 days

निर्देशनहरू

1

Weigh 99 : 0.5 : 0.5 and wet-mill 5 hours

Mix zinc oxide, manganese dioxide and antimony trioxide 99 : 0.5 : 0.5 by moles. Ours, for 10 g: 9.771 g zinc oxide, 0.053 g manganese dioxide, 0.177 g antimony trioxide (our arithmetic). Mill wet for 5 hours, then dry, as in Example 1. Unknown: the milling liquid.

यस चरणका सामग्री:

जिंक अक्साइड धुलोजिंक अक्साइड धुलो9.771 ग्राम
म्याङ्गनिज डाइअक्साइड (पाइरोलुसाइट)म्याङ्गनिज डाइअक्साइड (पाइरोलुसाइट)0.053 ग्राम
एन्टिमोनी ट्राइअक्साइडएन्टिमोनी ट्राइअक्साइड0.177 ग्राम

चाहिने औजार:

समभुज तराजुसमभुज तराजु
फलामे बल मिलफलामे बल मिल
सुकाउने भट्टीसुकाउने भट्टी
2

Press discs 13 mm by 2.5 mm

Press discs 13 mm across and 2.5 mm thick at 340 kg/cm², as in Example 1.

चाहिने औजार:

हाइड्रोलिक प्रेसहाइड्रोलिक प्रेस
डिस्क थिच्ने डाइडिस्क थिच्ने डाइ
भर्नियर क्यालिपरभर्नियर क्यालिपर
3

Sinter 1 hour at 1350 °C and furnace-cool

Sinter in air at 1350 °C for 1 hour and let the discs cool in the furnace.

चाहिने औजार:

मफल भट्टीमफल भट्टी
4

Lap both faces

Lap both faces with silicon carbide abrasive. Example 6 gives no thickness.

चाहिने औजार:

सिलिकन कार्बाइडका दानासिलिकन कार्बाइडका दाना
भर्नियर क्यालिपरभर्नियर क्यालिपर
5

Coat with bismuth oxide paste and fire at 800 °C

Coat both lapped faces with a paste of 50 % by weight bismuth oxide in a solution of epoxy resin in butyl alcohol, and fire it in air at 800 °C for 30 minutes. The bismuth oxide diffuses into the zinc oxide. Not given: how much paste, or the strength of the epoxy solution.

यस चरणका सामग्री:

बिस्मथ अक्साइडबिस्मथ अक्साइड1 as required

चाहिने औजार:

इपोक्सी रालइपोक्सी राल
n-ब्युटानोलn-ब्युटानोल
मफल भट्टीमफल भट्टी
6

Spray aluminium electrodes and attach leads

Spray a metallised film of aluminium on both faces. Attach a lead wire to each with conductive silver paint, as in Example 1. Unknown: the spraying method and the paint.

यस चरणका सामग्री:

एल्युमिनियमको ढिक्काएल्युमिनियमको ढिक्का1 as required
चाँदीको सुचालक रङचाँदीको सुचालक रङ1 as required
तामाको तारतामाको तार2 टुक्रा

चाहिने औजार:

धातु छर्कने अज्ञात विधिधातु छर्कने अज्ञात विधि
भर्नियर क्यालिपरभर्नियर क्यालिपर

सामग्री

7

आवश्यक उपकरणहरू

11

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...