SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Bone Folder Cut from a Leg Bone
A bone folder is a dull-edged tool for folding and creasing paper in bookbinding; traditionally it is cut from the leg bone of a cow or deer, which leaves little residue on the paper. Clean a leg bone, saw a strip from the thick wall of its shaft, shape one end round and the other to a blunt point, and smooth and polish it.
The picture: two bone folders, one straight and one tapered.
Baguhan
An afternoon
Mga Tagubilin
1
1
Clean the bone
Clean the bone
Simmer the leg bone in water until the meat and fat come away, scrub it, and let it dry for several days.
Mga materyales para sa hakbang na ito:
Buto1 piraso
Tubig5 litroMga kailangang kasangkapan:
Takure na Bakal
Hukay ng apoy2
2
Saw a strip
Saw a strip
Saw off the knobbly ends, then saw a strip about 2.5 cm wide and 15–20 cm long lengthways from the thick wall of the shaft. Wear a mask; bone dust is fine.
Mga kailangang kasangkapan:
Lagaring Pangkurba
Bais sa Mesang Panggawa
Maskara Laban sa Alikabok3
3
Shape it
Shape it
File the strip flat on both faces, round one end and taper the other to a blunt point. Keep every edge dull. Drill a small hole for a hanging cord if you like.
Mga kailangang kasangkapan:
Kikil na Pang-metalBais sa Mesang Panggawa
Barenang de-kamay4
4
Smooth and polish
Smooth and polish
Sand it smooth with finer and finer paper, then rub it on the strop until it is glossy and slides over paper without catching.
Mga kailangang kasangkapan:
Papel de Liha
Katad na panghasa5
5
Strips from one bone
Strips from one bone
Naglo-load ng Jupyter notebook…
Mga Kinakailangang Kasangkapan
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.