Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Capacitor Kit: Electrolytic and Ceramic Disc Capacitors Measured, Marked and Sorted
A workbench assortment of capacitors put together from the two kinds made here: wound electrolytic capacitors for large values and fired ceramic discs for small ones. Each is measured, marked and sorted by value.
Result: a capacitor kit of electrolytic and ceramic disc capacitors, every one labelled with its value and the electrolytics with their polarity.
Source: assembled from the Danziger electrolytic capacitor (US 2,107,780) and Coffeen ceramic disc capacitor (US 2,789,061) blueprints; the measuring, marking and sorting are Youblob's own. Picture: Wikimedia Commons.
Baguhan
2 hours
Mga Tagubilin
1
1
Measure each capacitor
Measure each capacitor
Measure the capacity of every electrolytic and ceramic disc capacitor. Ours: a benchtop LCR meter.
Mga materyales para sa hakbang na ito:
Electrolytic capacitor1 assorted
Ceramic disc capacitor1 assortedMga kailangang kasangkapan:
LCR meter na pang-mesa2
2
Mark value and polarity
Mark value and polarity
Write the measured value on each part. Electrolytic capacitors are polarised: mark which lead goes to the positive side. Ours: a permanent marker.
Mga kailangang kasangkapan:
Pangmarkang Hindi Nabubura3
3
Sort into the box
Sort into the box
Sort the capacitors by kind and value into the compartments of a box, one value to a compartment.
Mga kailangang kasangkapan:
Kahon na pang-ayos ng mga piyesa ng laroMga Materyales
2- 1 assortedPlaceholder
- 1 assortedPlaceholder
Mga Kinakailangang Kasangkapan
3- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.


