Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Crucible Furnace: the Brass Founder's Sunk Coke Air Furnace (Larkin, 1907)
The brass founder's crucible furnace: a firebrick-lined pit sunk below the floor, fired with hard coke on an iron grating over the ash-pit, closed by a dome-shaped iron cover and drawn by a flue with a damper. The crucible sits on a firebrick in the middle of the fire, lidded, with coke banked round it, until the metal is melted.
Result: a coke-fired crucible furnace for melting brass and bronze.
Source: J. Larkin, The Practical Brass and Iron Founder's Guide (1907), pp. 96-99. Unknown: all sizes. Picture drawn by Youblob.
Katamtaman
Unknown
Mga Tagubilin
1
1
Build the pit
Build the pit
Sink the furnace below the floor. Line the inside with firebricks set in fireclay; use pure clay (white, opaque, oily to the touch), since iron oxide, magnesia, lime or black lead in brick or clay shortens the furnace's life. Close the ash-pit at the bottom with a hinged iron grating. Not given: sizes.
Mga materyales para sa hakbang na ito:
Ladrilyong Matibay sa Apoy1 lining
Luwad na Matibay sa Apoy1 jointing
Hindi alam na metal1 hinged gratingMga kailangang kasangkapan:
Hindi alam na sukat2
2
Fit the cover and flue
Fit the cover and flue
Make a dome-shaped cover for the furnace top of cast or wrought iron. Lead a flue from the furnace with a damper in it. Not given: the flue size or height.
Mga materyales para sa hakbang na ito:
Hindi alam na metal1 dome cover, damper
Tubo ng tsimenea1 flueMga kailangang kasangkapan:
Hindi alam na sukat3
3
Fire it and melt
Fire it and melt
Burn hard coke broken to lumps the size of a fist. Heat the crucible bottom upwards in the fire, lift it out with the tongs, turn it upright and bed it on a slab of fireclay or a firebrick, put on its lid and bank the fire round it. Put the metal in, close the cover and open the damper for draught until the metal is melted. Black-lead crucibles last longer; clay ones must first be hardened by slowly raising their temperature.
Mga kailangang kasangkapan:
Kokeng metalurhiko
Krisol na grapito at luwad
Sipit ng KrisolMga Materyales
4- 1 liningPlaceholder
- 1 jointingPlaceholder
- 1 dome cover, damperPlaceholder
- 1 fluePlaceholder
Mga Kinakailangang Kasangkapan
4- Placeholder
- Placeholder
- Placeholder
- Placeholder
Mga Materyales ng Nakakonektang Blueprint
Ang blueprint na ito ay gumagawa ng
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.