SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Machete to a Relief Specification
Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Abantado
Factory process
Mga Tagubilin
1
1
Forge the blade
Forge the blade
Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.
Mga materyales para sa hakbang na ito:
Barang carbon steel (0.6 % C)1 pirasoMga kailangang kasangkapan:
Pandayan ng panday
Martilyong ibinabagsak2
2
Harden and temper
Harden and temper
Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.
Mga kailangang kasangkapan:
Pandayan ng panday
Panukat ng katigasang Rockwell3
3
Fit the handle
Fit the handle
Fit the wooden handle into the grooves and fix it with three steel rivets and washers.
Mga materyales para sa hakbang na ito:
Kahoy na Matigas Pang-hawakan1 piraso
Remaste na asero3 piraso
Mga washer na asero3 piraso4
4
Check
Check
Check the edge for dents and the hardness near the edge.
Mga kailangang kasangkapan:
Panukat ng katigasang RockwellMga Materyales
4- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 3 pirasoPlaceholder
- 3 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
3- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.


