Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Grosgrain Ribbon: Close Plain Weave with a Heavy Weft
Grosgrain is a firm, closely woven plain weave with a heavier weft than warp, which gives it ribs running across the width. It is used for hat bands, facings and waistbands. Historically it was silk or wool; this one is cotton, woven narrow on a rigid heddle loom.
The picture: grosgrain ribbons (Wikimedia Commons).
Katamtaman
Two evenings
Mga Tagubilin
1
1
The thread and twine
The thread and twine
Spinning the fine warp thread and the heavier twine used as weft.
2
2
Measure the warp
Measure the warp
For a ribbon 2.5 cm wide and 3 m long, wind enough fine warp threads to fill 2.5 cm of the heddle, each 3.5 m long to allow for tying on and loom waste.
Mga materyales para sa hakbang na ito:
Sinulid na Warp na Koton1 as requiredMga kailangang kasangkapan:
Tablang panghanay ng hibla
Panukat na Tape
Ruler3
3
Thread the heddle
Thread the heddle
Centre the warp in the heddle, one end through each slot and each hole, wind on under even tension and tie on at the front.
Mga kailangang kasangkapan:
Habihang may matigas na suklay4
4
Weave with a heavy weft
Weave with a heavy weft
Wind the twine on the shuttle. Weave plain weave: one pass with the heddle up, one with it down, and beat each pick firmly so the weave is close and the heavy weft forms ribs across the ribbon.
Mga materyales para sa hakbang na ito:
Pisi ng Bulak1 as requiredMga kailangang kasangkapan:
Habihang may matigas na suklay
Lansadera5
5
Keep the edges straight
Keep the edges straight
Draw each pick snug at the edges so the ribbon keeps its width; measure the width often.
Mga kailangang kasangkapan:
Ruler6
6
Cut off and secure
Cut off and secure
Cut the ribbon off the loom and knot or stitch both ends so the weft cannot slip off.
Mga kailangang kasangkapan:
Gunting sa tela7
7
Troubleshooting
Troubleshooting
Grosgrain troubleshooting.
Flow
Loading...
Mga Materyales
2- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.