SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Opacity and Tinting Strength: Why Some Colours Go Ten Times Further
Mary

Nilikha ni

Mary

24. Setyembre 2026FI
40
0
0
0
0

Opacity and Tinting Strength: Why Some Colours Go Ten Times Further

Two paints of the same colour can behave completely differently in a mixture: one overwhelms everything it touches, the other disappears. That is TINTING STRENGTH, and it is not the same thing as opacity. OPACITY is how well a paint hides what is underneath it. It comes from the difference in refractive index between the pigment particles and the binder around them — the bigger that difference, the more light is scattered and the less gets through. Which explains something that puzzles everyone at first: a pigment can be intensely coloured and nearly transparent, or pale and completely opaque. Ultramarine and titanium white are opposite extremes of exactly this, and knowing which you have is what makes glazing and mixing predictable.
Katamtaman
3 hours

Mga Tagubilin

1

Refractive index is what makes a pigment opaque

Naglo-load ng Jupyter notebook…

Mga materyales para sa hakbang na ito:

Set ng Pulbos na Pigmentong LupaSet ng Pulbos na Pigmentong Lupa1 piraso
Langis ng LinsidLangis ng Linsid1 piraso

Mga kailangang kasangkapan:

Desktop na KompyuterDesktop na Kompyuter
Panggiling na SalaminPanggiling na Salamin
Lupang PampalakiLupang Pampalaki
2

Make a transparency chart and keep it

Draw a thick black line across a white card, then paint a band of every colour you own across it, in one consistent thickness. Where the line shows through, that paint is transparent. Label each band and keep the card. It answers, instantly and for your actual paints, the question that decides whether a colour can be glazed, whether it will cover an underpainting, and how it will behave in a mixture. Do it again for any new brand. Two tubes labelled the same colour from different makers can differ enormously in pigment load and therefore in both opacity and tinting strength — the label names the pigment, not the formulation.

Mga materyales para sa hakbang na ito:

Set ng Pulbos na Pigmentong LupaSet ng Pulbos na Pigmentong Lupa1 piraso
Langis ng LinsidLangis ng Linsid1 piraso

Mga kailangang kasangkapan:

Set ng brotsa ng pintorSet ng brotsa ng pintor
RulerRuler
3

Glazing and scumbling use the two ends of the range

A GLAZE is a transparent dark colour over a lighter layer. Light passes through it, reflects off the layer beneath and comes back through — so the colour is produced by light that has travelled through the paint twice, which gives a depth no opaque mixture reproduces. A SCUMBLE is the opposite: a thin, broken, semi-opaque light colour dragged over a darker one. The result is optical rather than mixed, and it is how skies and flesh have been painted for four hundred years. Both fail with the wrong pigment. A glaze in titanium white is a pale opaque smear; a scumble in ultramarine disappears. Choosing the pigment for its optical behaviour, rather than only its hue, is what makes either technique work.

Mga materyales para sa hakbang na ito:

Set ng Pulbos na Pigmentong LupaSet ng Pulbos na Pigmentong Lupa1 piraso
Langis ng LinsidLangis ng Linsid1 piraso

Mga kailangang kasangkapan:

Set ng brotsa ng pintorSet ng brotsa ng pintor
Lupang PampalakiLupang Pampalaki
RulerRuler
4

Particle size changes both, and it changes with grinding

Scattering is strongest when the particles are roughly half the wavelength of light — around 0.2 to 0.3 micrometres. Larger or smaller and a pigment scatters less, so opacity has an optimum rather than rising forever with fineness. Which means grinding a pigment finer does not simply make it better. Natural ultramarine ground too fine becomes pale and grey, and the traditional coarse grind is not laziness — it is where the colour is. It also means two jars of the 'same' pigment can behave differently because they were milled differently. That is a real variable, it is invisible on the label, and it is one more reason to test what you actually have rather than what the name promises.

Mga materyales para sa hakbang na ito:

Set ng Pulbos na Pigmentong LupaSet ng Pulbos na Pigmentong Lupa1 piraso

Mga kailangang kasangkapan:

Panggiling na SalaminPanggiling na Salamin
Lupang PampalakiLupang Pampalaki

Mga Materyales

2

Mga Kinakailangang Kasangkapan

5

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...