Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Russia Sheet Iron: Charcoal-Packed Sheets Hammered to a Mirror Polish (Jordan after Koulibine, 1867)
The glossy blue-black Russia sheet iron, long a Russian secret, as the engineer Koulibine described it to Professor Jordan for the Paris Exhibition of 1867: charcoal iron is rolled into black sheets, then packed red-hot with powdered charcoal between them and hammered under a one-ton hammer, then polished cold under a second.
The charcoal, shut in between the hot sheets without air, cements the surface: it takes a high polish and rusts less. Once cemented, a sheet must not go back into the heating furnace.
Unknown: how the charcoal finery iron is made. The source does not give it.
Source: 'Russia Sheet Iron', Scientific American Supplement No. 154 (1878), pp. 2448-2449, after Jordan's 1867 report. Picture: the article.
Abantado
Unknown
Mga Tagubilin
1
1
Roll the blooms into leaves
Roll the blooms into leaves
Start from charcoal iron made in finery fires and brought into blooms about one inch thick. Heat the blooms to cherry heat and roll them into leaves. Ours: the furnace and the rolling mill; the source names neither.
Mga materyales para sa hakbang na ito:
Bakal na pinino sa uling1 blooms about 1 inch thickMga kailangang kasangkapan:
Pugon na Reberberatoryo
Makinang panipis ng metal
Sipit ng Panday2
2
Roll the black sheets
Roll the black sheets
Cut each leaf into pieces that match the weight of the sheets to be made. Pile the pieces on one another and roll them together until they are as thin as wanted. These are the black sheets.
Mga kailangang kasangkapan:
Gunting sa plakaPugon na ReberberatoryoMakinang panipis ng metalSipit ng Panday3
3
Pack with charcoal
Pack with charcoal
Heat a number of black sheets at a time to red heat and pile them one on another, sprinkling pulverized charcoal, a black impalpable powder, between each two. Two thicker sheets form the bottom and the cover of the packet. Ours: we pound lump charcoal in a mortar.
Mga materyales para sa hakbang na ito:
Uling na buo (matigas na kahoy)1 pulverizedMga kailangang kasangkapan:
Batong Almires at PanghaloPugon na ReberberatoryoSipit ng Panday4
4
Hammer the packet
Hammer the packet
Hammer the packet to thin the sheets further, under a hammer whose head weighs 1,000 to 1,100 kg (2,200 to 2,400 lb). Ours: a trip hammer; the source does not say how the hammer is driven.
Mga kailangang kasangkapan:
Martilyong ibinabagsakSipit ng Panday5
5
Polish under the second hammer
Polish under the second hammer
When the sheets are almost cold, bring them under a second hammer of the same weight with a large face, rounded at the edges, to give them polish and lustre. Do not put them back in the heating furnace.
Mga kailangang kasangkapan:
Martilyong ibinabagsakSipit ng Panday6
6
Clip and sort
Clip and sort
Let the sheets cool completely, then clip them and sort them into three classes by the perfection of their polish. A first-class sheet is like a mirror, without a spot on its surface.
Mga kailangang kasangkapan:
Gunting sa plakaMga Materyales
2- 1 blooms about 1 inch thickPlaceholder
- 1 pulverizedPlaceholder
Mga Materyales ng Nakakonektang Blueprint
Ang blueprint na ito ay gumagawa ng
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.