Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Sodium Bicarbonate: Soda Crystals Exposed to Carbonic Acid in Chambers (the Old Process)
Before the ammonia-soda works, baking soda was made by simply letting carbonic acid gas soak into soda crystals, as Thorpe's Dictionary (1913) describes. The crystals stand in layers on a lath false bottom; the gas comes in below, nine of the crystals' ten molecules of water drain away as mother liquor, carrying the impurities with it, and after 6 to 9 days the crystals have turned into loose, damp bicarbonate in their own shape. It is dried at no more than 45 °C.
The picture: our diagram.
Baguhan
3 weeks
Mga Tagubilin
1
1
Stack soda crystals on the lath bottom
Stack soda crystals on the lath bottom
Put ordinary soda crystals (yellow or inferior ones do as well) in regular layers on a false bottom of laths in a closed chamber (preferably iron), leaving space below for the drainage.
Mga materyales para sa hakbang na ito:
Sodang panlaba1 as requiredMga kailangang kasangkapan:
Silid-Gasan na may Huwad na Ilalim na Yari sa Manipis na Tabla
Gwantes na goma2
2
Pass in carbonic acid for 6 to 9 days
Pass in carbonic acid for 6 to 9 days
Lead carbonic acid gas in below the false bottom; it is usually made from calcium carbonate and hydrochloric acid (ours: whiting in a gas generator). The mother liquor drains off through a U-tube in the chamber bottom. The process is finished when this flow stops, generally in 6 to 9 days.
Mga materyales para sa hakbang na ito:
Calcium carbonate (puting tisa)1 as required
Hydrochloric acid1 as requiredMga kailangang kasangkapan:
Generator ng gasSilid-Gasan na may Huwad na Ilalim na Yari sa Manipis na Tabla
Salamin Laban sa Tilamsik ng KemikalGwantes na goma3
3
Dry at no more than 45 °C
Dry at no more than 45 °C
Open the chamber: the bicarbonate keeps the shape of the crystals but is a loose, very damp powder. Dry it in a stove at no more than 45 °C; this generally takes 8 to 10 days. Ours: a drying oven.
Mga kailangang kasangkapan:
Hurnong pantuyo
Termometrong PanlaboratoryoMga Materyales
3- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
Mga Kinakailangang Kasangkapan
6- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.