SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Tapered Tuning Pegs: Turned to 1:30 and Reamed to Fit
A friction tuning peg is a cone of hard wood that holds a string's tension simply by sitting tight in a matching tapered hole. A good one turns easily and holds without slipping. Violin and viola pegs are turned to a 1:30 taper, 1 mm narrower for every 30 mm of length; the hole is reamed to the same taper.
The picture: tapered wooden pegs for baroque violins, each with a collar and a flat grip.
Katamtaman
An afternoon for a set
Mga Tagubilin
1
1
Turn the shaft
Turn the shaft
Mount a hardwood dowel blank in the lathe and turn the shaft to a straight cone: check the diameter at both ends with a caliper against the notebook's figures for a 1:30 taper.
Mga materyales para sa hakbang na ito:
Mga tarugong matigas na kahoy1 pirasoMga kailangang kasangkapan:
Torno sa kahoy
Digital na Kalibrador 6 Pulgada
Salaming pangkaligtasan2
2
Shape the grip
Shape the grip
Leave a collar at the wide end, then flatten and shape the head into a grip with a spokeshave and knife.
Mga kailangang kasangkapan:
Katam na dalawa ang hawakan
Kutsilyo3
3
Ream the hole
Ream the hole
Drill a pilot hole through both cheeks of the pegbox and open it with a reamer of the same taper until the peg seats with most of its shaft in contact.
Mga kailangang kasangkapan:
Barenang de-kamay
Pampalapad ng butas4
4
String hole and fit
String hole and fit
Drill a small string hole through the shaft where it sits in the middle of the pegbox. Smooth the shaft; it should turn evenly and hold. If it slips, ream a touch further; if it sticks, lightly sand the shaft.
Mga kailangang kasangkapan:
Barenang de-kamay
Papel de Liha5
5
The 1:30 taper
The 1:30 taper
Naglo-load ng Jupyter notebook…
Mga Materyales
1- 1 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
8- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.