SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It
YourGrandma

Nilikha ni

YourGrandma

30. Setyembre 2026IS
34
0
0
0
0

The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It

A flat squeezer presses only the middle of the lemon's cut face, and the rind at its edge keeps its juice. John Klepzig of San Francisco, California, received US 84,125, dated 17 November 1868, for "forming an opening in one of the squeezing-levers. A movable button, which is operated by a spiral spring, is placed in the opening, and, by placing the fruit between the two levers, and closing them, the juice is expressed, through the hole in the bottom, into the tumbler, while the rind of the lemon is pressed closely against the face of the button-lever, completely enclosing the button." A projection on the other lever pushes the fruit down onto the button. This rung works out the lever's force and the spring's share, with a work check, then makes the levers in hardwood with a sprung, grooved button and a hollow stem, and squeezes lemons over a tumbler.
Katamtaman
About 4 hours

Mga Tagubilin

1

Lever and spring

Naglo-load ng Jupyter notebook…
2

A hinged squeezer before it

The embedded blueprint squeezes the lemon between two cups on crossed handles. Klepzig uses two hinged levers and lets a sprung button give way under the fruit.
3

Read US 84,125

"A and B are the two levers, connected by a hinge, C. The lever A has a projection, D, so that when the two levers are shut together, the small end of the button E, which sets in the openings in the lever B, is forced out." "The segregated half of the fruit is placed against the spring-button, and the opposite lever, having the projection, is brought down upon the small end, which presses the rind down upon the smooth surface of the button-lever, completely surrounding the button, and bearing down the spring, which forces out the stem, while the juice of the fruit passes through the centre hole, H, into the tumbler. The face of the button is concave and has grooves centring to the opening."
4

Make the levers and squeeze lemons

**Levers.** Cut two 25 cm levers from hardwood board, shaped like Klepzig's with handles at one end, and join the other ends with a butt hinge as C. **Button seat.** Drill a 45 mm stepped hole through lever B, 7 cm from the hinge, narrower at the back to leave a ledge. **Button.** Turn or rasp a hardwood button that slides in the hole, with a concave face carved with grooves running to a centre hole, and fix a short length of tube through its centre as the stem G, passing through the narrow back of the hole. Put a compression spring round the stem, resting on the ledge. **Projection.** Glue a rounded hardwood knob to lever A opposite the button as the projection D. **Test.** Seal the wood with food-safe oil. Hold the squeezer over a tumbler, lay a half lemon cut face down on the button, close the levers and press. Weigh the juice against a half squeezed on a flat board.

Mga materyales para sa hakbang na ito:

Tabla ng Matigas na KahoyTabla ng Matigas na Kahoy1 piraso
Tipak ng Matigas na KahoyTipak ng Matigas na Kahoy2 piraso
Bisagrang pintoBisagrang pinto1 piraso
Mga turnilyong pangkahoyMga turnilyong pangkahoy6 piraso
Tubo na aluminyoTubo na aluminyo0.05 metro
Iba't ibang compression springIba't ibang compression spring1 piraso
Pandikit sa KahoyPandikit sa Kahoy1 piraso
LimonLimon2 piraso

Mga kailangang kasangkapan:

Lagaring PangkamayLagaring Pangkamay
Walang-Kableng BarenaWalang-Kableng Barena
Hanay ng Talim ng BarenaHanay ng Talim ng Barena
Set ng pait para sa kahoySet ng pait para sa kahoy
Kikil na magaspangKikil na magaspang
Papel de LihaPapel de Liha
Set ng mga distornilyadorSet ng mga distornilyador
Kutsilyo sa kusinaKutsilyo sa kusina
Digital na Timbangang PangkusinaDigital na Timbangang Pangkusina
BasoBaso
5

A button that sticks, leaks or does not wrap the rind

Spring-button lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**John Klepzig** of San Francisco, California, received US 84,125, dated 17 November 1868. The opening in lever B was smaller at the back than at the face, leaving a ledge on which the spiral spring F rested, and the small end or tube G attached to the button passed through the lesser hole. His claim is the movable button with its opening and spiral spring, with the two levers. **Honest limits.** Hardwood levers, a carved button and a bought spring stand in for his made-up parts. The notebook ignores friction; its forces, lengths and spring are examples. Your juice weights are the result.

Mga Materyales

8

Mga Kinakailangang Kasangkapan

10

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...