Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Water-Cooled Copper Mould: Two Halves with Cast-In Pipes, in a Trunnion Yoke (Peirce, US 2,048,024, 1936)
Forge

Nilikha ni

Forge

3. Nobyembre 2026NO
11
0
0
0
0

Water-Cooled Copper Mould: Two Halves with Cast-In Pipes, in a Trunnion Yoke (Peirce, US 2,048,024, 1936)

A mould for metals that conduct heat well: two thick copper blocks, each cast round a grid of copper pipes that carry cooling water. They are bolted face to face, so the cavity can be machined accurately, and carried in a steel yoke on hollow trunnions that feed the water. A latched gate closes the bottom. The casting can be dumped out of the top by turning the yoke, or out of the bottom by opening the gate. Result: a water-cooled copper mould that freezes the metal fast and can be taken apart, machined and cleaned. Source: W. H. Peirce (American Smelting and Refining), US 2,048,024 (1936). Unknown: sizes and the copper grade. Picture: the patent drawing.
Abantado
Unknown

Mga Tagubilin

1

Cast the two halves round their pipes

For each half, assemble copper pipes into a grid: a horizontal inlet pipe at the bottom, an outlet pipe at the top, and several vertical pipes joining them. Any steam formed in casting then rises to the outlet. Cast a block of copper of about the mould's shape over the grid. Ours: copper ingot melted in a crucible furnace. Not given: sizes, the copper grade.

Mga materyales para sa hakbang na ito:

Tubong tansoTubong tanso1 cooling-pipe grids
Lingote ng TansoLingote ng Tanso1 mould blocks

Mga kailangang kasangkapan:

Pugon na may cruciblePugon na may crucible
Hindi alam na sukatHindi alam na sukat
2

Machine the cavity

Machine the inner faces of the two halves to form the casting space, accurately. The recesses can be cut to different depths, for example five-eighths of the casting's width in one half and three-eighths in the other. Bolt the halves together face to face.

Mga materyales para sa hakbang na ito:

Hindi alam na metalHindi alam na metal1 bolts

Mga kailangang kasangkapan:

Makinang panggiling ng metalMakinang panggiling ng metal
Baradong NakatayoBaradong Nakatayo
Set sa paggawa ng sinulid ng turnilyoSet sa paggawa ng sinulid ng turnilyo
3

Make the yoke and the bottom gate

Cast a U-shaped steel yoke in one piece: two hollow ends with trunnions in line, joined by struts that carry the mould, bolted on. Make a bottom gate machined to fit tight under the mould, with its own cooling passage. Mount it on a gate arm keyed to a shaft across the yoke, its wedge end pinned in a V slot so the gate rocks to align. Add a lever on the shaft and a latch on an eccentric with a handle, to lock the gate up tight. Ours: steel ingot for the yoke casting.

Mga materyales para sa hakbang na ito:

Bloke ng aseroBloke ng asero1 yoke casting
Hindi alam na metalHindi alam na metal1 gate, arm, shaft, lever, latch

Mga kailangang kasangkapan:

Pugon na may cruciblePugon na may crucible
Makinang panggiling ng metalMakinang panggiling ng metal
4

Pipe the cooling water

Bring water in through a pipe in the centre of one trunnion into the hollow yoke end, and from there by fitted pipes to the inlets of both halves and by a flexible metal hose to the gate. Lead the outlets to the other hollow end, and out through a pipe in the centre of the other trunnion, so the water keeps flowing while the yoke turns. Not given: the hose, the flow.

Mga materyales para sa hakbang na ito:

Tubong tansoTubong tanso1 inlet and outlet pipes
Hindi kilalang materyalHindi kilalang materyal1 metallic hoses

Mga kailangang kasangkapan:

TubigTubig
5

Cast and dump a cake

Latch the gate shut, coat the cavity with a mould dressing such as graphite, circulate the water and fill the mould with molten metal. When the cake has cooled, turn the yoke on its trunnions so it slides out of the top, or trip the latch so the gate swings back and it drops out of the bottom. Unbolt the halves now and then to clean them or machine their faces true again.

Mga kailangang kasangkapan:

Pulbos na GrapaytPulbos na Grapayt
TubigTubig

Mga Materyales

5

Mga Kinakailangang Kasangkapan

7

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...