تعاون
فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات

Woven Harvesting Basket: the Square Willow Basket with Bow Handle (Hasluck, 1903)
A sturdy square willow basket with a rope-wrapped bow handle over the open top, for carrying and gathering: the basket-maker's 'grocer's square basket'. Bottom 17 x 11 in, sides 11 in deep to the wale, corner sticks, a foot rim and a handle about 20 in high.
Source: Paul N. Hasluck, Basket Work of All Kinds (1903), pp. 27-47. Picture: Figs. 48-51 of the book.
اعلیٰ
Unknown
ہدایات
1
1
Weave the bottom in the screw-block
Weave the bottom in the screw-block
Wet the sticks an hour ahead. Cut six sticks 20 in long (3 in extra for the block), the two outside ones thicker. Set the outside pair 11 in apart in the screw-block, the four inside evenly between, thick and thin ends alternating (Fig. 33). Start with two osiers worked together, then weave one rod at a time, butts behind odd sticks, checking the 11 in width with a bent gauge rod and tapping the weave close with the iron, to 17 in long. Lock the end with one long rod (Fig. 34), take it out and pick off the ends.
اس مرحلے کے لیے مواد:
موٹی بید کی چھڑیاں6 20 in
بید کی چھڑی1 weaversدرکار اوزار:
پانی
بڑی قینچی
کانٹ چھانٹ کی قینچی
ہتھوڑا
چپٹا لکڑی کا تختہ2
2
Stake up and fit corner sticks
Stake up and fit corner sticks
Point seventeen pairs of stakes, about half as thick as the sticks: ten for each side, seven for each end. Push the end stakes in beside the sticks; for the sides open holes through the outside sticks with the bodkin. Bend each stake up with the picking knife and gather them in a small hoop (Fig. 35). Cut four corner sticks as thick as the outside bottom sticks, flat-cut at the foot (Fig. 37).
اس مرحلے کے لیے مواد:
بید کے کھونٹے34 17 pairs
موٹی بید کی چھڑیاں4 corner sticksدرکار اوزار:
فیتہ پرونے والی سوئی
کانٹ چھانٹ کی قینچی
ہتھوڑا3
3
Upset and rand the sides
Upset and rand the sides
Upset with three rods (four if there will be no foot rim), working the corner sticks in at each corner (Figs. 38-39), and add a second round. Rand with rods drawn in their lengths, each butt one stake on from the last, to about 10 in deep, keeping the sides upright and true. Leave a space between the two middle stakes of each side the full depth for the handle. Put strainers across when the middle stakes come out of the hoop, and level the weaving at about 9 in.
اس مرحلے کے لیے مواد:
بید کی چھڑی1 upsetting, randingدرکار اوزار:
ہتھوڑا
فیتہ پرونے والی سوئی4
4
Wale, border and pick
Wale, border and pick
Work a wale of four rods, each behind two stakes and in front of two (Fig. 43), using eight rods, to 11 in deep. Lay the stakes down into the border and finish by cramming (Figs. 45-47). Pick every butt and top inside and out so the outside is smooth.
اس مرحلے کے لیے مواد:
بید کی چھڑی8 waleدرکار اوزار:
کانٹ چھانٹ کی قینچی
ہتھوڑا5
5
Add the foot rim
Add the foot rim
Turn the basket over, push a rim stake in beside each stake and each corner stick, upset once round with six rods, tap down and border 'inside two and outside three' (Fig. 49).
اس مرحلے کے لیے مواد:
بید کے کھونٹے1 rim stakes
بید کی چھڑی6 upsettingدرکار اوزار:
فیتہ پرونے والی سوئی
ہتھوڑا6
6
Fit and wrap the bow handle
Fit and wrap the bow handle
Bend a thick, well-soaked stick into a bow (Fig. 48), push its ends down the handle spaces to the upsetting, about 8 to 9 in above the border (some 20 in from the bottom to the underside of the bow), and shoulder it with the knee. Wrap it with four long smooth osiers, each twisted rope-fashion and lapped round the bow and through under the wale (Figs. 50-51).
اس مرحلے کے لیے مواد:
موٹی بید کی چھڑیاں1 bow
بید کی چھڑی4 handle wrapدرکار اوزار:
پانی
فیتہ پرونے والی سوئی
کانٹ چھانٹ کی قینچیمواد
3- 1 bowپلیس ہولڈر
- 4 handle wrapپلیس ہولڈر
- 1 rim stakesپلیس ہولڈر
منسلک بلیو پرنٹ مواد
یہ بلوپرنٹ بناتا ہے
CC0 پبلک ڈومین
یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔
میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔


