SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Acrylic Mirror Sheet: Silver Sprayed on Tannin-Treated Acrylic
Silver from a chemical bath barely sticks to acrylic: tannin in plain water gave no bond at all. Philips' Ponjee and Verwijlen (US 4,639,382, 1987) found that tannin dissolved in water mixed with an organic solvent such as ethanol makes the silver hold firmly, without etching or clouding the acrylic. The sheet is dipped for a minute, sensitised with a weak stannous chloride spray, then silvered by spraying the silver solution and the reducer together. In the patent's cross-cut test, no squares of silver came off.
The picture: our diagram.
Średniozaawansowany
2 hours
Instrukcje
1
1
Dip in tannin solution for one minute
Dip in tannin solution for one minute
Make a solution of 2.3–5.0 g of tannic acid per litre in water with 15–60 % ethanol by volume. Dip the acrylic sheet in it for one minute.
Materiały do tego kroku:
Płyta akrylowa1 sztukaPotrzebne narzędzia:
Kwas taninowy
Etanol - klasa laboratoryjna, 95 %
Woda destylowana
Tace szklane
Cylinder miarowy
Waga szalkowa
Rękawice gumowe2
2
Rinse with water
Rinse with water
Rinse the sheet with water.
Potrzebne narzędzia:
Woda destylowana
Tryskawka laboratoryjna3
3
Spray with stannous chloride for 12 seconds
Spray with stannous chloride for 12 seconds
Spray the face to be silvered with a solution of 0.1 g stannous chloride and 0.1 ml concentrated hydrochloric acid per litre of water, for 12 seconds. Rinse off the excess with water.
Potrzebne narzędzia:
Chlorek cyny(II)
Kwas solny
Woda destylowana
Butelka ze spryskiwaczem
Tryskawka laboratoryjna
Gogle chemiczne
Rękawice gumowe4
4
Spray silver and reducer together
Spray silver and reducer together
Atomise two solutions onto the face at the same time: silver nitrate with ammonia in water, and formalin in water. The patent gives no strengths: as required. Ours: a twin-nozzle spray gun.
Materiały do tego kroku:
Azotan srebra1 as requiredPotrzebne narzędzia:
Roztwór amoniaku 25-28 %
Roztwór formaldehydu (formalina 37 %)
Woda destylowana
Pistolet natryskowy z dwiema dyszami
Dygestorium (z odciągiem)
Gogle chemiczne
Rękawice gumoweMateriały
2- 1 sztukaZastępnik
- 1 as requiredZastępnik
Wymagane narzędzia
16- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

Tannic Acid: Powdered Galls Extracted with Ether (Pelouze, Pharmacopoeia Form)
autor: Charlie
Przemysłowy
8
0
0
0
0
0

Niebezpieczne
Stannous Chloride (Tin Salt): Tin Dissolved in Hydrochloric Acid and Crystallised
autor: Charlie
Nieorganiczny
7
0
0
0
0
0

Niebezpieczne
Making a Silver Mirror by the Liebig Process — Depositing Metallic Silver on Glass
autor: Charlie
Przestrzeń
108
0
0
0
0
0
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.
