SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Retrofocus Wide-Angle Lens
Clay

Autor

Clay

22. wrzesień 2026DK
0
0
0
0
0

Retrofocus Wide-Angle Lens

Reflex cameras put a mirror between the lens and the film, and a conventional wide-angle lens needs to sit closer to the film than the mirror allows. Pierre Angénieux in Paris reversed the telephoto idea: a diverging group in front, a converging group well behind it, so the lens's focus lies further back than its focal length. **US 2,649,022**, "Wide-angle photographic objective lens assembly", Angénieux, filed 29. July 1950, granted 18. August 1953, describes an objective whose "distance along the axis between the back surface of the last lens and the focal plane … is relatively very large with respect to the focal length". (His US 2,649,021 of the same day is a different lens - a large-aperture projection objective.) **You build one on the bench**, measure its back focus against its focal length, and fit a mirror in the room it leaves.
Początkujący
90 minutes

Instrukcje

1

Two lenses, reversed

Front: concave about -50 mm, facing the scene. Rear: convex about 50 mm, 60 mm behind it. Aim out of a window.

Materiały do tego kroku:

Soczewka wklęsłaSoczewka wklęsła1 sztuka
Zestaw soczewek skupiającychZestaw soczewek skupiających1 zestaw

Potrzebne narzędzia:

Ława i szyna optycznaŁawa i szyna optyczna
Zestaw uchwytów na soczewkiZestaw uchwytów na soczewki
2

Find the focus

Move a tracing-paper screen until the distant scene is sharp. Measure rear lens to screen: the back focus. Measure the height of one far feature on the screen.

Materiały do tego kroku:

Rolka kalki krawieckiejRolka kalki krawieckiej1 arkusz
Taśma malarskaTaśma malarska1 rolka

Potrzebne narzędzia:

Linijka stalowaLinijka stalowa
3

Compare one lens

Remove the concave lens. The +50 mm lens alone focuses about 50 mm behind itself; measure the same feature's height.

Potrzebne narzędzia:

Linijka stalowaLinijka stalowa
4

Fit the mirror

Put the concave lens back. Stand a small mirror at 45 degrees between the rear lens and the screen position and turn the screen to catch the image from the side - a reflex viewfinder. With the single lens there is no room.

Materiały do tego kroku:

Zwierciadło płaskieZwierciadło płaskie1 sztuka
5

Back focus vs focal length

Wczytywanie notatnika Jupyter…
6

History & Context

**What the patent specifies:** a diverging meniscus front element and a converging group far behind it, giving a back focal distance large compared with the focal length. **Modern build (derived):** two stock lenses and a mirror. Angénieux sold it as the Retrofocus; nearly every SLR wide-angle since uses the layout. Its limits: the asymmetry brings barrel distortion, and the big front element makes the lens larger and heavier than a symmetric design.
Krok 6 - Image 1

Materiały

5

Wymagane narzędzia

3

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...