Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)
Charlie

Autor

Charlie

4. listopad 2026DE
15
0
0
0
0

Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)

The simplest aspirator: a closed vessel of known volume, full of water, with a tap at the bottom. As the water runs out it draws gas in through the apparatus attached to it, and the volume of water run out is the volume of gas drawn through. Result: an aspirator that draws a measured volume of gas, for example 1/10 cubic foot, through an absorber at a steady rate. Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), pp. 581-582. Unknown: the vessel's material and the tap. Picture: p. 581 of the book.
Początkujący
Unknown

Instrukcje

1

Fit the vessel

Take a vessel of known volume, for example exactly 1/10 cubic foot, and fix a tap at its bottom. Close its mouth tightly with a cork carrying a glass tube, which connects to the absorber the gas is to pass through. Ours: a large clear glass bottle. Not given: the vessel's material, the tap.

Materiały do tego kroku:

Butelka szklana (bezbarwna)Butelka szklana (bezbarwna)1 aspirator vessel
Nieznany zawórNieznany zawór1 bottom tap
KorkiKorki1 stopper
Rurka szklanaRurka szklana1 inlet tube

Potrzebne narzędzia:

Palnik stołowy do dmuchania szkłaPalnik stołowy do dmuchania szkła
Nieznane wymiaryNieznane wymiary
2

Set the flow and draw the gas

Fill the vessel with water, connect the absorber, check that everything is tight, and open the tap partly: the small outflow of water draws the gas through the absorber. For an even rate, fit about a yard of tubing to the outlet, for a steady head, ending in a fine jet tried beforehand to give the time wanted; used reversed, the jet clogs less. When the vessel is empty the gas stops, and the water run out measures the gas passed. Collect and measure the water if the vessel is not of fixed volume.

Materiały do tego kroku:

Wąż gumowyWąż gumowy1 outlet tubing
Rurka szklanaRurka szklana1 jet

Potrzebne narzędzia:

Cylinder miarowyCylinder miarowy

Materiały

5

Wymagane narzędzia

3

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...