Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)
Woody

Autor

Woody

13. listopad 2026NO
6
0
0
0
0

Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)

F. E. Kennar's wooden skates from The Boy Mechanic, Book 2 (1915), made "to take the place of the usual steel-runner kind" and to prevent sprained ankles: two hardwood runners nailed under a 4 in board, held apart by blocks and bolts, with corner pieces to locate the shoe and straps to hold it. Make two alike.
Początkujący
About 3 hours

Instrukcje

1

His sizes in centimetres

Wczytywanie notatnika Jupyter…
2

Read The Boy Mechanic, Book 2

"Skates that will take the place of the usual steel-runner kind and which will prevent spraining of the ankles, can be made of a few pieces of 1/2-in. hardwood boards."
3

Cut the runners

From 1/2 in hardwood, cut four runners 2 in wide at the back and 1-1/2 in wide at the front, each 2 in longer than the shoe. Shape the front ends as in his figure.

Materiały do tego kroku:

Deska z drewna liściastegoDeska z drewna liściastego1 sztuka

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
Piłka włosowaPiłka włosowa
Strug ręcznyStrug ręczny
OłówekOłówek
Miara zwijanaMiara zwijana
4

Assemble each skate

Nail the top edges of a pair of runners to the underside of a board 4 in wide, at its edges. Fasten a block 2 in wide between the runners at the rear and one 1 in wide in front. Bore the runners and put two bolts through, one just behind the front block and one in front of the rear block.

Materiały do tego kroku:

Deska z drewna liściastegoDeska z drewna liściastego1 sztuka
GwoździeGwoździe1 sztuka
Śruba zamkowaŚruba zamkowa2 sztuk

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
MłotekMłotek
Wiertarka ręcznaWiertarka ręczna
5

Fit the corner pieces and straps

Fasten four triangular pieces on top, one at each corner, so the heel and toe of the shoe fit between them; if you like, nail a crosspiece in front of the heel. Attach straps to the sides to fasten the skate to the shoe. Make the second skate the same.

Materiały do tego kroku:

Deska z drewna liściastegoDeska z drewna liściastego1 sztuka
GwoździeGwoździe1 sztuka
Rzemień skórzanyRzemień skórzany2 sztuk

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
MłotekMłotek
Wiertarka ręcznaWiertarka ręczna
6

Troubleshooting

Wooden skate troubleshooting.

Flow

Loading...
7

History and honest limits

From "Skates Made of Wood" by F. E. Kennar, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 30). The scan says hardwood boards; the Gutenberg text drops "hardwood". He gives no sizes for the bolts, straps or corner pieces. The tools and metric figures are ours.

Materiały

4

Wymagane narzędzia

7

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...