Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)
How axes and hatchets were made of iron and shear steel, from George Edwinson's smithing series (Amateur Work, 1886): a flat iron bar folded round a tapering mandrel to make the eye, the leaves welded, and a thin slice of steel welded between them so the ground edge is always steel.
Zaawansowany
A day at the forge
Instrukcje
1
1
Read Edwinson
Read Edwinson
"By this means a layer of steel is enclosed between two layers of iron, and a steel edge is always ensured to the tool."
2
2
Fold the eye
Fold the eye
Take flat iron of the width and thickness you want, twice the length of the blade. Heat it and bend it over a tapering mandrel the same section as the handle (his fig. 225).
Materiały do tego kroku:
Pręt z kutego żelaza1 sztukaPotrzebne narzędzia:
Kuźnia kowalska
Kowadło
Młot dwuręczny
Szczypce kowalskie
Przebijak rozszerzający3
3
Close and shape the eye
Close and shape the eye
Weld the two leaves together where they meet near the eye. Reheat and forge the eye to shape on the mandrel, then drive the mandrel in the other way to open the inner edge of the eye slightly.
Materiały do tego kroku:
Boraks w proszku1 sztukaPotrzebne narzędzia:
Kuźnia kowalska
Kowadło
Młotek
Przebijak rozszerzający4
4
Lay in the steel
Lay in the steel
Put a thin slice of shear steel, as wide as the axe, between the two leaves. Bring both to a welding heat and forge them down together to the thickness and width wanted.
Materiały do tego kroku:
Płyta ze stali szweisowanej1 sztuka
Boraks w proszku1 sztukaPotrzebne narzędzia:
Kuźnia kowalska
Kowadło
Młot dwuręczny
Szczypce kowalskie5
5
Hatchet hammer (variant)
Hatchet hammer (variant)
For a carpenter's hatchet (fig. 223) weld a rectangular piece of steel to the back of the eye and forge it down with it as the hammer. The miner's hatchet (fig. 224) has a massive ear, a bar-steel hammer and a slit in the blade for drawing nails. Do not make a woodman's axe square-headed: men drive wedges with the back and spoil it.
Materiały do tego kroku:
Stal tyglowa1 sztukaPotrzebne narzędzia:
Kuźnia kowalska
Kowadło
Młotek
Przecinak na gorąco6
6
Pare and smooth
Pare and smooth
Pare the rough forging to shape with hot chisels (his setts) while hot. Hammer the sides well at a low red heat until smooth.
Potrzebne narzędzia:
Kuźnia kowalska
Przecinak na gorąco
Kowadło
Młotek7
7
Harden, temper and grind
Harden, temper and grind
Harden and temper the blade, then grind it on a grindstone to sharpen the edge and polish the blade.
Potrzebne narzędzia:
Kuźnia kowalska
Kadź hartownicza
Toczydło8
8
Hang the head (ours)
Hang the head (ours)
He does not cover the handle. Ours: fit a hickory handle blank to the eye and wedge it.
Materiały do tego kroku:
Półfabrykat trzonka siekiery (hikora)1 sztuka
Kliny drewniane1 sztukaPotrzebne narzędzia:
Ośnik
Młotek9
9
Troubleshooting
Troubleshooting
Axe troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and figs. 222-225. He gives no temper colour for axes, no sizes and no handle: those are ours.
Materiały
6- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- Zastępnik
- 1 sztukaZastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.




