Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)
How a village smith made picks in the 1880s, from George Edwinson's smithing series in Amateur Work: an iron head welded round its eye, the ends split hot and steel wedges welded in, then hardened and tempered. Variants: the common pick, the pickaxe with a steel-laid axe blade, and the miner's pick with a steel-faced hammer end.
Zaawansowany
A day at the forge
Instrukcje
1
1
Read Edwinson
Read Edwinson
"The eye or hole for the shaft is formed by first shaping the two sides ... and then welding the two parts together."
2
2
Form the eye
Form the eye
Forge the two halves of the head with a hollow for the eye in each (his fig. 216), lay them together and weld them into one head round the eye (fig. 217).
Materiały do tego kroku:
Pręt z kutego żelaza1 sztukaPotrzebne narzędzia:
Kuźnia kowalska
Kowadło
Młotek
Szczypce kowalskie
Przebijak rozszerzający3
3
Draw the ends
Draw the ends
Forge the two ends down to the size you need: a pointed bill and a chisel bill for the common pick, an axe and a point for the pickaxe, a point and a hammer for the miner's pick. For the miner's pick leave the eye massive and oval, tapering from both sides as in a hammer.
Potrzebne narzędzia:
Kuźnia kowalska
Kowadło
Młotek
Młot dwuręczny4
4
Steel the points
Steel the points
Split each bill end with a hot chisel (his hot sett, fig. 218), insert a wedge of steel in the cleft and weld it in under borax, then draw it out to shape. Do not heat cast steel above a cherry red.
Materiały do tego kroku:
Stal tyglowa1 sztuka
Boraks w proszku1 sztukaPotrzebne narzędzia:
Kuźnia kowalska
Przecinak na gorąco
Młot dwuręczny
Kowadło
Szczypce kowalskie5
5
Steel the axe or hammer end
Steel the axe or hammer end
Pickaxe: enclose a slice of shear steel between the folding leaves of iron at the axe end and forge them down together to form the axe. Miner's pick: face the hammer end with steel.
Materiały do tego kroku:
Płyta ze stali szweisowanej1 sztuka
Boraks w proszku1 sztukaPotrzebne narzędzia:
Kuźnia kowalska
Kowadło
Młotek
Szczypce kowalskie6
6
Harden and temper
Harden and temper
Harden the points and temper them to a brown tint tending to straw at the very point. Temper the pickaxe blade purple where steel meets iron, running to straw at the edge.
Potrzebne narzędzia:
Kuźnia kowalska
Kadź hartownicza7
7
Handle it (ours)
Handle it (ours)
He does not cover the handle. Ours: shape an ash handle to the eye, drive it in and wedge it.
Materiały do tego kroku:
Kęs jesionowy1 sztuka
Kliny drewniane1 sztukaPotrzebne narzędzia:
Ośnik
Młotek8
8
Troubleshooting
Troubleshooting
Pick troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond). He gives no dimensions or weights; the sizes, the handle and the tools listed are ours.
Materiały
6- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.



