SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Machete to a Relief Specification
Forge

Autor

Forge

11. październik 2026NO
20
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Zaawansowany
Factory process

Instrukcje

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

Materiały do tego kroku:

Kęsisko ze stali wysokowęglowejKęsisko ze stali wysokowęglowej1 sztuka

Potrzebne narzędzia:

Kuźnia kowalskaKuźnia kowalska
Młot ogoniastyMłot ogoniasty
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

Potrzebne narzędzia:

Kuźnia kowalskaKuźnia kowalska
Twardościomierz RockwellaTwardościomierz Rockwella
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

Materiały do tego kroku:

Listwa z drewna twardego na trzonkiListwa z drewna twardego na trzonki1 sztuka
Nity staloweNity stalowe3 sztuk
Podkładka płaskaPodkładka płaska3 sztuk
4

Check

Check the edge for dents and the hardness near the edge.

Potrzebne narzędzia:

Twardościomierz RockwellaTwardościomierz Rockwella

Materiały

4

Wymagane narzędzia

3

Według tego planu powstaje

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...