SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Gravity: Measuring the Sugar Before and After Tells You Everything
Alchometer

Autor

Alchometer

24. wrzesień 2026GB
23
0
0
0
0

Gravity: Measuring the Sugar Before and After Tells You Everything

Sugar dissolved in water makes it denser. Yeast converts that sugar into alcohol, which is LESS dense than water. So measuring the density before and after fermentation tells you how much sugar was consumed — and therefore how much alcohol was made. That is what a hydrometer does, and it turns brewing from guesswork into measurement. Two readings and a subtraction give the strength, and the same two readings tell you whether fermentation finished or stalled. Which makes it the one instrument that is genuinely not optional. A brewer without gravity readings does not know how strong the drink is, whether it is safe to bottle, or what went wrong when something does.
Początkujący
2 hours

Instrukcje

1

Take the reading properly

Float the hydrometer in a tall sample jar, not in the fermenter. Spin it gently as you let go so the bubbles clinging to it release — bubbles lift it and give a reading that is too low. Read at the bottom of the meniscus, at eye level, exactly as with any volumetric glassware. And take the sample AT the calibration temperature or correct for it: most hydrometers are calibrated at 20 °C, and a hot sample reads low because the liquid has expanded. Never pour the sample back. It has been exposed, it has been in an un-sanitised jar, and returning it risks the whole batch for a few millilitres. Taste it instead — that sample is also your best early warning of an off-flavour.

Materiały do tego kroku:

WodaWoda1 litr

Potrzebne narzędzia:

Areometr i cylinder pomiarowy do piwowarstwaAreometr i cylinder pomiarowy do piwowarstwa
Zestaw termometru i areometru do piwowarstwaZestaw termometru i areometru do piwowarstwa
Termometr błyskawicznyTermometr błyskawiczny
2

From two readings to alcohol

Wczytywanie notatnika Jupyter…

Materiały do tego kroku:

WodaWoda1 litr

Potrzebne narzędzia:

Areometr i cylinder pomiarowy do piwowarstwaAreometr i cylinder pomiarowy do piwowarstwa
Komputer stacjonarnyKomputer stacjonarny
KalkulatorKalkulator
3

A refractometer is fast and lies after fermentation starts

A refractometer needs two drops instead of a full sample jar, works on hot wort, and gives a reading in seconds. For pre-fermentation gravity it is far more convenient than a hydrometer. But alcohol bends light differently from sugar, so once fermentation has started the reading is systematically wrong. Correction formulae exist and they need the original gravity as an input, which means a refractometer alone cannot give a final gravity. That is a textbook systematic error: repeatable, in one direction, invisible from the reading itself. Use the refractometer for the start and the hydrometer for the end, which is each instrument used where it does not lie.

Potrzebne narzędzia:

Refraktometr Brixa (0-32 %)Refraktometr Brixa (0-32 %)
Areometr i cylinder pomiarowy do piwowarstwaAreometr i cylinder pomiarowy do piwowarstwa
4

Write every reading down with its date

A single gravity reading tells you very little. Two readings three days apart tell you whether fermentation is finished, and a series tells you how fast it went and whether it slowed unexpectedly. So log OG on brew day, then a reading every few days once the visible activity slows. The criterion for done is two or three identical readings over several days — the dry-to-constant-mass loop from the chemistry batch, applied to a fermenter. Record the temperature with every reading, and the yeast used. Those three columns together turn a brewery into something that improves rather than one that produces a different drink each time.

Potrzebne narzędzia:

Areometr i cylinder pomiarowy do piwowarstwaAreometr i cylinder pomiarowy do piwowarstwa
Termometr błyskawicznyTermometr błyskawiczny

Materiały

1
  • 2 litrów
    Zastępnik

Wymagane narzędzia

6

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...