Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Saddle Crupper: Slit Body, Buckled Billet and Paper-Cored Dock (Hasluck, Saddlery, 1904)
Tex

Autor

Tex

13. listopad 2026FO
2
0
0
0
0

Saddle Crupper: Slit Body, Buckled Billet and Paper-Cored Dock (Hasluck, Saddlery, 1904)

A saddle crupper runs from the back of a riding saddle to a padded loop (the dock) under the horse's tail, so the saddle cannot slide forward. This is the full-sized saddle crupper from Paul N. Hasluck's Saddlery (1904): a slit leather body, a buckled billet, and a dock shaped over string and wet brown paper. Every size is his.
Średniozaawansowany
About 1 day

Instrukcje

1

His sizes in centimetres

Wczytywanie notatnika Jupyter…
2

Read Saddlery, ch. V

"Full-sized saddle cruppers (Fig. 9), which are used to prevent the saddle from advancing too much, are made about 1 in. wide, and sometimes a little more."
3

Cut the body

Cut the body about 1 in wide (or a little more) and about 1 ft 6 in long. Slit one end for about 5 in and turn the other end in for a 7/8 in buckle. Shave the points of the slits and the end of the chape.

Materiały do tego kroku:

Skóra uprzężowaSkóra uprzężowa1 sztuka

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
Miara zwijanaMiara zwijana
4

Make the billet and set the buckle

Cut a billet as wide as the buckle and 2 ft 4 in long; trim one end for the buckle and shave the other. Edge both pieces, polish the edges and crease them with a hot checker. Put on the buckle and stitch the billet: the first stitch by the buckle goes over the edge and through chape and billet together, the next through the loop. Run four or five stitches towards the point on each side, and come back to the buckle on the other side, making the last stitch over the side the same as the opposite side.

Materiały do tego kroku:

Skóra uprzężowaSkóra uprzężowa1 sztuka
Żelazna klamra z kolcemŻelazna klamra z kolcem1 sztuka
Nić lnianaNić lniana1 sztuka
Wosk pszczeliWosk pszczeli1 sztuka

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
Fazownik krawędziFazownik krawędzi
Gładzik do krawędzi skóryGładzik do krawędzi skóry
BigownicaBigownica
Palnik propanowyPalnik propanowy
SzydłoSzydło
Dwie igły rymarskieDwie igły rymarskie
Kozioł rymarskiKozioł rymarski
5

Put on the loop

Put a loop on the flat lower down the body, about 6 in from the buckle, stitching it across at each end.

Materiały do tego kroku:

Skóra uprzężowaSkóra uprzężowa1 sztuka
Nić lnianaNić lniana1 sztuka
Wosk pszczeliWosk pszczeli1 sztuka

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
Wzornik do szlufekWzornik do szlufek
SzydłoSzydło
Dwie igły rymarskieDwie igły rymarskie
6

Shape the dock core

The dock is much smaller round than a gig crupper dock. Take a piece of string about 1 ft long and roll wet brown paper round it until it is the thickness you need in the middle; thin the ends by cutting the paper before damping it.

Materiały do tego kroku:

SznurekSznurek1 sztuka
Brązowy papier pakowy (szary)Brązowy papier pakowy (szary)1 sztuka

Potrzebne narzędzia:

NożyczkiNożyczki
GąbkaGąbka
Miara zwijanaMiara zwijana
7

Cover the dock

Cut the dock leather about 1 ft 1 in long; it must be soft and pliable, so damp it before stitching. Stitch it over the core as it is, without cutting a groove, drawing it very tightly over the paper. Dry the dock and finish it in shape.

Materiały do tego kroku:

Skóra uprzężowaSkóra uprzężowa1 sztuka
Nić lnianaNić lniana1 sztuka
Wosk pszczeliWosk pszczeli1 sztuka

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
GąbkaGąbka
SzydłoSzydło
Dwie igły rymarskieDwie igły rymarskie
Kozioł rymarskiKozioł rymarski
8

Join the dock and punch the billet

Stitch the dock to the slits with a splice of about 1-1/4 in. Put about a dozen holes in the billet, and vary the lengths to suit the size of horse.

Materiały do tego kroku:

Nić lnianaNić lniana1 sztuka
Wosk pszczeliWosk pszczeli1 sztuka

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
SzydłoSzydło
Dwie igły rymarskieDwie igły rymarskie
Dziurkacz do skóryDziurkacz do skóry
9

Troubleshooting

Saddle crupper troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, "Saddle Cruppers, Breastplates, and Other Accessories", saddle cruppers, pp. 40-41, Fig. 9; every fraction was read on the scan. He does not say how the billet fastens to the saddle; check against Fig. 9 and your saddle. The thread, tools and metric figures are ours.

Materiały

6

Wymagane narzędzia

13

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...