
Building a Langspil — The Icelandic Drone Zither
Instrukcje
Melody and drone from one box
Melody and drone from one box
Cut the soundbox parts
Cut the soundbox parts
Materiały do tego kroku:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 sztukaTools needed:
HacksawGlue the box frame
Glue the box frame
Materiały do tego kroku:
PVA Wood Glue1 sztukaFit the soundboard
Fit the soundboard
Materiały do tego kroku:
Dry Softwood Board1 sztuka
PVA Wood Glue1 sztukaCut a soundhole
Cut a soundhole
Tools needed:
Sloyd Carving KnifeDrill the peg holes
Drill the peg holes
Tools needed:
AwlFit the tuning pegs
Fit the tuning pegs
Materiały do tego kroku:
Tuning Pegs3 sztukCarve the nut and bridge
Carve the nut and bridge
Tools needed:
Sloyd Carving KnifeString it
String it
Materiały do tego kroku:
Steel Music Wire1 sztukaSet the frets
Set the frets
Materiały do tego kroku:
Fret Wire1 sztukaTools needed:
Metal FileTune the drones
Tune the drones
Tune the melody string
Tune the melody string
Play it
Play it
Compendium — the drone zither
Compendium — the drone zither
Materiały
6- Placeholder
- 2 sztukPlaceholder
- 1 sztukaPlaceholder
- 3 sztukPlaceholder
- 1 sztukaPlaceholder
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue - Instead of Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack), try:
CDX Softwood Plywood
Fire-Rated Plywood - Instead of Steel Music Wire 0.032", try:
Hook-Up Wire - Assortment (Stranded)
Tie Wire
Thin Brass Wire (for cleaning spouts)
Slip Ring - 6 Wire (2A)
Bezel Wire
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
Related blueprints
Other builds that share materials, tools, or techniques with this one.






CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.