Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Folding Ground Seat With Adjustable Back Rest: Three Oak Frames, Duck Covers and a Notched Base (Boy Mechanic, 1919)
Woody

Autor

Woody

14. listopad 2026NO
7
0
0
0
0

Folding Ground Seat With Adjustable Back Rest: Three Oak Frames, Duck Covers and a Notched Base (Boy Mechanic, 1919)

T. H. Linthicum's folding ground seat from The Boy Mechanic, Book 3 (1919): an 18 x 20 in duck seat and an 18 x 22 in duck back hinged to an open oak base frame, with a 19-1/2 in adjusting frame that drops into notches 2 in apart to set the back. It folds flat and also serves across a bed or trunk.
Średniozaawansowany
About 1 day

Instrukcje

1

Frames in centimetres

Wczytywanie notatnika Jupyter…
2

Read The Boy Mechanic, Book 3

"Those who enjoy sitting or lying upon the grass while reading will find the device shown in the illustration convenient and comfortable."
3

Make the three frames

From oak (or other common wood) make three rectangular frames with mortise-and-tenon joints, to his dimensions: the back 18 by 22 in, the seat 18 by 20 in and the base 18 by 20 in. Cut adjusting notches in the base sides 2 in apart.

Materiały do tego kroku:

Deska z dębu białegoDeska z dębu białego3 sztuk
Klej do drewnaKlej do drewna1 sztuka

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
DłutaDłuta
Pobijak drewnianyPobijak drewniany
Strug ręcznyStrug ręczny
Miara zwijanaMiara zwijana
OłówekOłówek
4

Make the adjusting frame

Make the adjusting frame 19-1/2 in wide outside and 18 in inside, 11 in high, of 1-1/4 in stock, with the end details drawn 3/4, 1/4 and 3/8 in; its foot drops into the base notches.

Materiały do tego kroku:

Deska z dębu białegoDeska z dębu białego1 sztuka
Klej do drewnaKlej do drewna1 sztuka

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
DłutaDłuta
Strug ręcznyStrug ręczny
5

Cover the seat and back

Cover the seat and back frames with heavy duck, turning it in 1/2 in at the edges (tacks are ours).

Materiały do tego kroku:

Płótno bawełnianePłótno bawełniane1 sztuka
Zestaw gwoździków tapicerskichZestaw gwoździków tapicerskich1 sztuka

Potrzebne narzędzia:

NożyczkiNożyczki
MłotekMłotek
6

Hinge and assemble

Hinge the back and the seat to the base, and fasten the adjusting frame to the back with screws so it can fold; drop its foot into a base notch to set the back's angle.

Materiały do tego kroku:

Zawias czopowyZawias czopowy4 sztuk
Wkręty do drewnaWkręty do drewna1 sztuka

Potrzebne narzędzia:

Wiertarka ręcznaWiertarka ręczna
Wkrętak płaskiWkrętak płaski
7

Using it

Ground seat use.

Flow

Loading...
8

History and honest limits

From "A Folding Ground Seat with Back Rest" by T. H. Linthicum, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, p. 190). He gives the frame sizes in the drawing but not every rail section or the notch depth. The tools and metric figures are ours.

Materiały

6

Wymagane narzędzia

10

Według tego planu powstaje

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...