Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Spring Nest Box Inside a Shell of Bark Slabs, Kept Cool and Drained (Reiber, 1916)
Edwin H. Reiber of West Webster, New York, received US 1,185,345, dated 30 May 1916, for a bird house built after years of watching nesting birds. In a house made from a hollowed limb, he found most young died of heat and vermin. So he put a ventilated, drained cedar nesting box inside a bigger shell of bark-covered slabs, spaced apart so air moves round the box and the bark keeps off the sun.
All sizes are ours.
Początkujący
About 4 hours
Instrukcje
1
1
Box and shell
Box and shell
Wczytywanie notatnika Jupyter…
2
2
Read US 1,185,345
Read US 1,185,345
"The invention really consists of a weatherproof box for the nest arranged within a relatively large shell far from weatherproof."
3
3
Build the nesting box
Build the nesting box
Cut and nail a box of red cedar board (his claim 3), sized from the notebook, his box 5. Leave the floor as slats with small gaps (his slats 12). Bore the entrance 8 near the top of the front, cut a few narrow ventilating slots 10 high in the sides, and drill drainage holes 11 low down.
Materiały do tego kroku:
Deska cedrowa1 sztuka
Gwoździe ocynkowane1 sztukaPotrzebne narzędzia:
Miara zwijana
Ołówek
Piła ręczna
Świder korbowy z wiertłem
Wiertarka ręczna
Dłuta
Młotek ciesielski4
4
Build the shell
Build the shell
Make a larger box and gabled roof of bark-covered slabs, bark outward, nailed to a cedar frame and spaced a little apart so air passes through, his shell 6 and slabs 7. Drill drainage openings 14 in its base.
Materiały do tego kroku:
Okorek1 sztuka
Deska cedrowa1 sztuka
Gwoździe ocynkowane1 sztukaPotrzebne narzędzia:
Piła ręczna
Wiertarka ręczna
Młotek ciesielski5
5
Fit the box in the shell
Fit the box in the shell
Fix the nesting box inside the shell on cedar blocks so it stands clear of the shell all round. Bore the shell's entrance 9 in line with the box's entrance, and fit a short dowel perch 13 just below it.
Materiały do tego kroku:
Deska cedrowa1 sztuka
Kołki z twardego drewna1 sztuka
Gwoździe ocynkowane1 sztukaPotrzebne narzędzia:
Świder korbowy z wiertłem
Wiertarka ręczna
Młotek ciesielski6
6
Mount it
Mount it
Set the house on a small platform on a post with diagonal braces, as his Fig. 1 (ours: sizes), in a shady spot before the birds return in spring.
Materiały do tego kroku:
Deska cedrowa1 sztuka
Gwoździe ocynkowane1 sztukaPotrzebne narzędzia:
Piła ręczna
Młotek ciesielski7
7
Troubleshooting
Troubleshooting
Nest box troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
**Edwin H. Reiber** of West Webster, New York, US 1,185,345, dated 30 May 1916, filed 13 January 1916. He claimed "a bird house, comprising a shell formed of spaced slabs and provided with an aperture in the side thereof for the passage of a bird, and a box for a nest within said shell and spaced therefrom", and in claim 3 "slabs of sassafras" and a box "of red cedar". Not built: his woodpecker house (Fig. 4) and the suet-filled pine cone feeder. He gives no sizes: all sizes, the entrance size, nails and the post are ours.
Materiały
4- 1 sztukaZastępnik
- 4 sztukZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.


