SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Stopwatch: Lugrin, 1876
Henri Alfred Lugrin of New York patented this timing watch in 1876, US 176,231. Instead of placing the timing hand on the face, where it needs more gearing, he put the timing hand and its own dial on top of the watch movement. The hand is geared to the watch's second wheel through a pinion and wheel, and sits on its post by a tube and friction spring, so it can be stopped while the watch runs on. A heart-shaped cam and lever return it to the start, and the same lever also returns a minute hand on a small sectional dial beside it. A stop lever holds the timing hand. Lugrin's hand moves in fifths of a second but he calls it the quarter-second hand.
Zaawansowany
Watchmaker's work
Instrukcje
1
1
Timing hand and dial
Timing hand and dial
Mount the timing hand and its dial on top of the watch movement, the hand on a short centre post.
Materiały do tego kroku:
Mechanizm zegarka1 sztuka
Wskazówka i tarcza pomiaru czasu1 sztukaPotrzebne narzędzia:
Zestaw pincet precyzyjnych
Zestaw wkrętaków2
2
Gear it to the movement
Gear it to the movement
Gear the post to the second wheel of the watch train through a pinion and wheel.
Materiały do tego kroku:
Zębnik i koło przekładni pomiarowej1 sztukaPotrzebne narzędzia:
Zestaw pincet precyzyjnych
Zestaw wkrętaków3
3
Friction connection
Friction connection
Connect the hand to its post by a tube and friction spring, so the hand can be stopped without stopping the movement.
Materiały do tego kroku:
Sprężyna i rurka cierne1 sztukaPotrzebne narzędzia:
Zestaw pincet precyzyjnych4
4
Minute recorder
Minute recorder
Place the minute hand and its sectional dial at one side of the timing hand, on a post geared with the barrel wheel, connected by the same kind of tube and friction spring.
Materiały do tego kroku:
Wskazówka i tarcza licznika minut1 sztukaPotrzebne narzędzia:
Zestaw pincet precyzyjnych
Zestaw wkrętaków5
5
Return and stop
Return and stop
Fit the heart-shaped cams and the return lever, extended so one lever returns both hands to the start at once, and fit the stop lever.
Materiały do tego kroku:
Krzywka sercowa i dźwignia powrotna1 sztuka
Dźwignia zatrzymująca1 sztukaPotrzebne narzędzia:
Zestaw pincet precyzyjnych
Zestaw wkrętakówMateriały
7- 1 sztukaZastępnik
- 1 sztukaZastępnik
- Zastępnik
- 1 sztukaZastępnik
- Zastępnik
- Zastępnik
- 1 sztukaZastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

