Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Hand Files Cut With a Double-Edged Hammer and Tempered in Burnt Ox Horn and Salt (Theophilus, 12th Century)
How a medieval metalworker made his own files, from Theophilus's De Diversis Artibus (12th century): files of steel, or of soft iron faced with steel, forged to size, smoothed and cut with a double-edged hammer or cutting iron, then hardened by sprinkling them glowing with burnt ox horn and salt and quenching. Small soft-iron files are packed in lard, goatskin and clay instead.
Zaawansowany
About 1 day per few files
Instrukcje
1
1
The hardening mix
The hardening mix
Wczytywanie notatnika Jupyter…
2
2
Read De Diversis Artibus, Book III
Read De Diversis Artibus, Book III
"Files are made from pure steel, large and moderately sized, triangular and round. Others also are made which are stronger in the middle, from soft iron inside, but outwardly they are covered with steel."
3
3
Forge and smooth the blanks
Forge and smooth the blanks
Beat steel (or soft iron covered with steel) to the size and shape wanted: large or moderate, triangular or round; for small files, square, round, triangular or thin. Smooth them on a planing instrument (a filing or scraping bed).
Materiały do tego kroku:
Pręt ze stali węglowej (0,6 % C)1 sztuka
Pręt z kutego żelaza1 sztukaPotrzebne narzędzia:
Palenisko kowalskie
Miech
Kowadło
Młotek
Kleszcze kowalskie
Pilniki (pilnik ręczny)4
4
Cut the teeth
Cut the teeth
Mark out the teeth with a hammer sharp on both sides, or with the cutting iron, until the file is cut all over.
Potrzebne narzędzia:
Młotek
Przecinak do nacinania pilników
Kowadło
Imadło warsztatowe5
5
Temper with horn and salt
Temper with horn and salt
Burn an ox horn in the fire, scrape it, mix it with a third part of salt and grind it hard. Heat the file until it glows, sprinkle the mixture over it everywhere, lay hot coals on and blow quickly over the whole without letting the coating fall off; then draw it out and quench it evenly in water, and dry it slightly over the fire. He tempers all steel things this way.
Materiały do tego kroku:
Róg bydlęcy1 sztuka
Sól1 sztukaPotrzebne narzędzia:
Palenisko kowalskie
Miech
Pipeta
Kleszcze kowalskie
Kadź hartownicza6
6
Or pack small soft-iron files
Or pack small soft-iron files
For small soft-iron files, after cutting, anoint them with the grease of an old hog, bind them with small straps of buck-goat skin tied with flaxen thread, and cover each with beaten clay, leaving the handles (tangs) bare. Dry them, put them in the fire and blow strongly until the skin is burned, take them quickly out of the clay, quench evenly in water, and dry them at the fire.
Materiały do tego kroku:
Tłuszcz wieprzowy (sadło i słonina)1 sztuka
Skóra kozia1 sztuka
Nić lniana1 sztuka
Glina1 sztukaPotrzebne narzędzia:
Palenisko kowalskie
Miech
Kleszcze kowalskie
Kadź hartownicza
Nóż do skóry7
7
Troubleshooting
Troubleshooting
File troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapters XVII-XIX, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 223-225). He gives no sizes, temperatures or tooth spacing. The tools and the case-hardening explanation are ours.
Materiały
8- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- Zastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
Wymagane narzędzia
11- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

