Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Timber Beams Hewn Square from the Log
Before sawmills, beams for frames and machines were hewn square from the log with axes. Snap a chalk line, score notches down to it, knock out the wood between them (juggling), then hew the face smooth to the line with a broadaxe. Turn the log and do each side.
The picture: shipwrights with broadaxes hewing timbers for a ship, about 1915–1920 (Bain News Service, Library of Congress).
Średniozaawansowany
A day per beam
Instrukcje
1
1
Set the log up and mark
Set the log up and mark
Block the log off the ground so it cannot roll. Mark the beam's outline on both ends with the square and snap chalk lines along the log between them.
Materiały do tego kroku:
Kłoda1 sztukaPotrzebne narzędzia:
Kątownik stolarski
Sznur traserski2
2
Score
Score
Stand on the log and chop notches every 30 cm or so, almost down to the line.
Potrzebne narzędzia:
Siekiera
Kask ochronny3
3
Juggle
Juggle
Knock off the blocks of wood between the notches with the axe, leaving a rough face just short of the line.
Potrzebne narzędzia:
Siekiera4
4
Hew to the line
Hew to the line
Hew the face smooth to the chalk line with the broadaxe, working from the bottom of the stem upward.
Potrzebne narzędzia:
Bradwa5
5
Turn and repeat
Turn and repeat
Roll the log a quarter turn, snap new lines from the end marks, and hew the next face. Check the corners with the square; dress any high spots with the adze.
Potrzebne narzędzia:
Sznur traserski
Kątownik stolarski
Ciosła6
6
The biggest beam in a log
The biggest beam in a log
Wczytywanie notatnika Jupyter…
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.



