ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Cyanoacrylate Adhesive
Woody

Создано

Woody

22. сентябрь 2026NO
23
0
0
0
0

Cyanoacrylate Adhesive

Harry Coover first met cyanoacrylates in 1942 while looking for a clear plastic for gun sights, and rejected them because they stuck to everything. In 1951 at Eastman Kodak he and Fred Joyner met them again - and this time saw a glue that set in seconds with no heat or pressure. It was sold from 1958. **US 2,794,788**, "Adhesive compositions containing alkyl esters of cyanoacrylic acid", Coover and Shearer, Eastman Kodak, filed 1. November 1952, granted 4. June 1957, claims the monomeric alkyl α-cyanoacrylate adhesive. **US 2,768,109**, "Alcohol-catalyzed alpha-cyanoacrylate adhesive compositions", Coover, filed 2. June 1954, granted 23. October 1956, claims "strongly bonding wood having an acidic surface character" by first moistening it with an alcohol of 1 to 8 carbon atoms. **You test that second claim on oak**, an acidic wood: dry, wiped with isopropyl alcohol, and misted with water.
Начинающий
1 hour plus 24 h

Инструкции

1

Cut the strips

Saw eighteen oak strips 80 x 20 mm, about 5 mm thick. Sand one end face of each with 180 grit and dust off. Pencil-mark three groups: dry, IPA, water.

Материалы для этого шага:

Доска из белого дубаДоска из белого дуба1 штука
Наждачная бумагаНаждачная бумага1 лист

Необходимые инструменты:

Ножовка по деревуНожовка по дереву
2

Prepare the surfaces

Leave the first group dry. Wipe the ends of the second with isopropyl alcohol on a towel and use them within a minute. Give the third one light mist of water and blot. Note the room humidity.

Материалы для этого шага:

Изопропиловый спирт 99 %Изопропиловый спирт 99 %10 мл
Бумажное полотенцеБумажное полотенце2 листов

Необходимые инструменты:

Пульверизатор для водыПульверизатор для воды
Гигрометр (измеритель влажности)Гигрометр (измеритель влажности)
3

Glue and time

Gloves and glasses on. One drop of CA on one end, overlap a partner strip by 20 mm, press 5 seconds and start the stopwatch. Every 10 seconds hang the spring scale from the free strip and pull to 2 N: record when it first holds. Three joints per group.

Материалы для этого шага:

Секундный клей (цианакрилат)Секундный клей (цианакрилат)1 штука

Необходимые инструменты:

СекундомерСекундомер
Динамометр (пружинные весы)Динамометр (пружинные весы)
Нитриловые перчаткиНитриловые перчатки
Прозрачные защитные очкиПрозрачные защитные очки
4

Break them tomorrow

After 24 hours clamp one strip of each joint in the vise and tap the free end sideways with the mallet until it breaks. Estimate how much of the bond area is torn wood.

Необходимые инструменты:

Слесарные тискиСлесарные тиски
Резиновая киянкаРезиновая киянка
Прозрачные защитные очкиПрозрачные защитные очки
5

Set times and joints

Загрузка блокнота Jupyter…
6

History & Context

**What the patents specify:** a monomeric alkyl α-cyanoacrylate adhesive held liquid by an acid inhibitor, and, for acidic surfaces, a prior wipe with a C1–C8 alcohol. **Modern build (derived):** hardware-store CA glue on oak. CA spread from industry to every workshop, and in the Vietnam War medics used a CA spray to seal wounds; purpose-made medical grades followed. Its limits: brittle joints that fail in peel and impact, poor gap filling, and it bonds skin instantly - acetone releases it.
Шаг 6 - Image 1

Материалы

5

Требуемые инструменты

9

Связанные чертежи

Эти чертежи делятся знаниями — техники, материалы или принципы

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...