Сотрудничество
ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Stirrup Leathers: Middlings Straps Stitched to Stirrup Buckles, Creased on the Flesh Side (Hasluck, Saddlery, 1904)
Tex

Создано

Tex

13. ноябрь 2026FO
1
0
0
0
0

Stirrup Leathers: Middlings Straps Stitched to Stirrup Buckles, Creased on the Flesh Side (Hasluck, Saddlery, 1904)

Stirrup leathers hang the stirrup irons from a riding saddle and let the rider set their length. These are the stirrup leathers from Paul N. Hasluck's Saddlery (1904): a strap of stirrup middlings 1-1/4 in wide and 4 ft to 4 ft 6 in long, stitched to a stirrup leather buckle and creased on the flesh side. A saddle takes a pair.
Начинающий
About 3 hours

Инструкции

1

His sizes in centimetres

Загрузка блокнота Jupyter…
2

Read Saddlery, ch. V

"Stirrup leathers (Fig. 15) must be made from stirrup middlings, and with stirrup leather buckles; the width may be 1-1/8 in. to 1-1/2 in., but 1-1/4 in. is most common, whilst the length varies from 4 ft. to 4 ft. 6 in."
3

Cut the straps

Cut two straps from stirrup middlings, 1-1/4 in wide (1-1/8 in to 1-1/2 in) and 4 ft to 4 ft 6 in long, to suit the rider. There is no need to cut holes for the buckle tongues at the buckle end, as the tongues do not go through the leather there.

Материалы для этого шага:

Средняя кожа для путлищСредняя кожа для путлищ1 штука

Необходимые инструменты:

Нож для кожиНож для кожи
РулеткаРулетка
4

Stitch on the buckles

Bend the strong end of each strap over for about 2 in and stitch it firmly to the bottom of the buckle. Narrow the buckling end a little and nip a little from each corner.

Материалы для этого шага:

Пряжка путлищаПряжка путлища2 штук
Льняная нитьЛьняная нить1 штука
Пчелиный воскПчелиный воск1 штука

Необходимые инструменты:

Нож для кожиНож для кожи
ШилоШило
Две шорные иглыДве шорные иглы
Шорные тискиШорные тиски
5

Finish the edges and crease

Stain the edges and polish them well. Crease double and heavily with a hot screw crease on the flesh side, instead of the grain side as with other straps.

Материалы для этого шага:

Краска для кожиКраска для кожи1 штука

Необходимые инструменты:

КромкорезКромкорез
Лощильник для кромки кожиЛощильник для кромки кожи
БиговщикБиговщик
Пропановая горелкаПропановая горелка
6

Turn the chape and punch

Turn the chape at the buckle the reverse way, and make about eight holes in each strap.

Необходимые инструменты:

Пробойник для кожиПробойник для кожи
РулеткаРулетка
7

Troubleshooting

Stirrup leather troubleshooting.

Flow

Loading...
8

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, stirrup leathers, pp. 48-49, Fig. 15 on p. 47; every fraction was read on the scan. He says about eight holes; his Fig. 15 shows seven. The ladies' single stirrup strap is not made here. Making them as a pair, the thread, tools and metric figures are ours.

Материалы

5

Требуемые инструменты

10

По этому чертежу делают

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...