ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush
Woody

Создано

Woody

6. октябрь 2026NO
32
0
0
0
0

The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush

An oil can and a rag spill, and a brush dipped in oil drips. Preston H. Clingan of Florence, Colorado, received US 787,278, dated 11 April 1905, for "a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof": an open thimble hangs from the can's mouth to near its bottom, a rolled burlap wick inside it is frayed above the mouth into a brush, and oil in the chamber round the thimble reaches the wick from underneath. This rung works out how high a wick can lift oil, then builds the can from a jar, a tin and burlap and weighs the oil it lays on a board.
Начинающий
About 2 hours

Инструкции

1

How high the wick lifts

Загрузка блокнота Jupyter…
2

A wick that feeds oil before it

The embedded blueprint feeds oil to a bearing through a wick. Clingan turns the wick's frayed end into the brush.
3

Read US 787,278

"My object is to provide a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof. The can includes a wick of absorbent material, which is constantly supplied with oil or other fluid within the can."
4

Make the thimble

Remove both ends of a tin can that passes through the jar's mouth with 6 mm to spare. Cut it 10 mm shorter than the jar's inside height. File the cut edges.

Материалы для этого шага:

Жестяная банкаЖестяная банка1 штука

Необходимые инструменты:

Ножницы по металлуНожницы по металлу
Напильники (ручной напильник)Напильники (ручной напильник)
ЛинейкаЛинейка
Кожаные рабочие перчаткиКожаные рабочие перчатки
5

Cut the lip ring

Cut an aluminium ring: outside to fit inside the jar's mouth, inside to fit round the thimble. Drill it 3 mm for a filling screw.

Материалы для этого шага:

Алюминиевый листАлюминиевый лист1 штука

Необходимые инструменты:

Ножницы по металлуНожницы по металлу
Аккумуляторная дрельАккумуляторная дрель
Набор свёрлНабор свёрл
Напильники (ручной напильник)Напильники (ручной напильник)
6

Fix the thimble

Epoxy the ring round the thimble's top and into the jar's mouth, the thimble hanging 10 mm clear of the floor. Cut a rubber washer for the filling screw.

Материалы для этого шага:

Стеклянная банкаСтеклянная банка1 штука
Двухкомпонентная эпоксидкаДвухкомпонентная эпоксидка1 штука
Машинные винтыМашинные винты1 штука
Резиновый листРезиновый лист1 штука

Необходимые инструменты:

Макетный ножМакетный нож
Набор отвёртокНабор отвёрток
7

Roll the wick

Roll a strip of burlap tightly until it fills the thimble, 15 mm longer than it. Push it in and fray the top 15 mm with the fingers.

Материалы для этого шага:

МешковинаМешковина1 штука

Необходимые инструменты:

НожницыНожницы
ЛинейкаЛинейка
8

The build in 3D

FreeCAD model of this build, not of the patent: a 90 mm jar with a 66 mm mouth, the aluminium lip ring and filling screw, a 53 mm thimble 10 mm off the floor, the burlap wick with its frayed top, and the lid.
Файл дизайнаBLENDCC0 - Free
9

Oil a board and weigh it

Pour linseed oil through the filling hole to half the jar's height and wait until the wick's top darkens. Weigh a plywood board, brush it once over, and weigh it again. Turn the closed jar on its side over a rag for a minute.
Шаг 9 - Image 1

Материалы для этого шага:

Варёное льняное маслоВарёное льняное масло1 штука
Лист фанерыЛист фанеры1 штука
Хлопковая ветошьХлопковая ветошь1 штука

Необходимые инструменты:

Цифровые кухонные весыЦифровые кухонные весы
СекундомерСекундомер
РулеткаРулетка
10

A wick that stays dry, floods or leaks

Oil-wick fountain brush troubleshooting.

Flow

Loading...
11

History and honest limits

**Preston H. Clingan** of Florence, Colorado, assignor of one-half to John H. Todd of Cañon City, filed US 787,278 on 28 July 1904; it is dated 11 April 1905. His can is cylindrical with both ends contracted and threaded, so the cover fits either end; the thimble is soldered to an inward lip at the mouth; the wick is preferably a roll of burlap. He named oiling or polishing surfaces and cleaning windows among its uses. **Honest limits.** A jar with one threaded mouth stands in for his can. The notebook assumes a fully wetting wick and one pore size. Your weights are the result.

Материалы

10

Требуемые инструменты

12

Файлы дизайна

1

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...