ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Thermostatic Electric Iron
Volt

Создано

Volt

22. сентябрь 2026SE
0
0
0
0
0

Thermostatic Electric Iron

The electric flat-iron already published has one state: on. Leave it plugged in and it keeps getting hotter until something scorches - the user is the thermostat. The rung above it puts the Butz idea, a bimetallic strip, inside the iron: the iron holds whatever temperature the dial asks for, and silk and linen each get their own. **US 2,723,336**, "Thermostatically controlled electric flatiron or the like", Swenson and Finlayson, assigned to General Electric, filed 23. July 1953, granted 8. November 1955. **You build the thermostat, not the mains appliance**: a bimetallic strip switching a battery-powered lamp, measured on a hotplate - then you measure a real iron's cycling from the outside.
Начинающий
2 hours

Инструкции

1

A switch from a strip

Clamp one end of the bimetallic strip. Set a screw or a stiff wire as the contact so the free end presses it at room temperature. Wire strip and contact in series with the LED, its resistor and the battery holder: the lamp is on while they touch.

Материалы для этого шага:

Биметаллическая пластинаБиметаллическая пластина1 штука
LED - Basic 5mmLED - Basic 5mm1 штука
Набор резисторовНабор резисторов1 набор
Набор проводов Dupont (папа-мама)Набор проводов Dupont (папа-мама)1 набор

Необходимые инструменты:

Держатель батареек AA (4 элемента)Держатель батареек AA (4 элемента)
Пружинный зажимПружинный зажим
2

Heat it and watch

Tape the thermocouple to the strip. Warm it gently on the hotplate and note the temperature when the lamp goes out; let it cool and note when it lights again. Three runs.

Необходимые инструменты:

ЭлектроплиткаЭлектроплитка
Термопара с индикаторомТермопара с индикатором
Прозрачные защитные очкиПрозрачные защитные очки
3

Move the contact

Turn the contact screw in by half a turn so the strip must bend further, and repeat. That screw is the iron's fabric dial.

Необходимые инструменты:

Термопара с индикаторомТермопара с индикатором
4

Measure a real iron

Stand a steam iron on its heel on a heatproof surface at a mid setting. With the infrared thermometer on the soleplate and a stopwatch, time how long its indicator lamp stays on and off over several cycles, and note the highest and lowest readings.

Необходимые инструменты:

Паровой утюгПаровой утюг
Инфракрасный термометрИнфракрасный термометр
СекундомерСекундомер
5

Bend, hysteresis, duty cycle

Загрузка блокнота Jupyter…
6

History & Context

**What the patent specifies:** a flatiron whose heating element is switched by a thermostat set from a fabric dial, holding the soleplate at the chosen temperature. **Modern build (derived):** the bimetal switch alone, on safe low voltage, plus outside measurements of a working iron. The same bimetal switch went into kettles, ovens, toasters and motor overload protectors. Its limits: the strip switches over a few degrees of swing, it ages with cycling, and it senses its own temperature - not the cloth's.
Шаг 6 - Image 1

Материалы

4

Требуемые инструменты

8
Предполагаемая сумма
То, что купил мастер. Материалы без цены вы покупаете там, где найдёте.
$0.77

Связанные чертежи

Эти чертежи делятся знаниями — техники, материалы или принципы

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...