Ubufatanye
UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
English
Acrylic Pellets: Methyl Methacrylate Stirred into Beads in Gelatine Water at 75 °C (Crawford & McGrath, ICI, US 2,108,044)
Stirred hard enough in water with a little gelatine, methyl methacrylate breaks into droplets that harden into separate beads of acrylic instead of one solid lump. ICI's beads settle out, wash easily and go straight to the moulding press.
Result: hard acrylic granules, used as moulding and extrusion pellets (they are beads, not cut pellets).
Source: Crawford & McGrath, US 2,108,044 (ICI, 1938), Examples 5 and 6. Picture drawn by Youblob.
Hejuru
1 day
Amabwiriza
1
1
Dissolve 1 part benzoyl peroxide in 100 parts monomer
Dissolve 1 part benzoyl peroxide in 100 parts monomer
Dissolve 1 part by weight of benzoyl peroxide in 100 parts of methyl methacrylate.
Ibikoresho by'iyi ntambwe:
Metili Metakirilate100 parts by weight
Peroxyde ya benzoyle1 part by weightIbikoresho bikenewe:
Umunzani w'ibiro2
2
Mix with 200 parts of water holding 2 parts gelatine
Mix with 200 parts of water holding 2 parts gelatine
Mix it with 200 parts of water containing 2 parts of gelatine in solution (Example 6; Example 5 uses a soluble starch instead).
Ibikoresho bikenewe:
Ifu ya jelatine
Amazi
Igikoresho cyo gukora polymère gifite ikoti3
3
Stir at 1000 rpm and blow in steam to 75 °C
Stir at 1000 rpm and blow in steam to 75 °C
Stir at 1000 rpm and blow steam into the stirred mixture to bring it to 75 °C, and hold it there. After about 115 minutes the temperature starts to rise by itself: shut off the steam.
Ibikoresho bikenewe:
Igikoresho cyo kuvanga
Inkono itanga umwuka w'amazi
Igipima Ubushyuhe cy'Ubushakashatsi4
4
At the 82 °C peak, cool to 60 °C with cold water
At the 82 °C peak, cool to 60 °C with cold water
When the temperature peaks at 82 °C, cool the mixture to 60 °C by adding cold water.
Ibikoresho bikenewe:
Amazi5
5
Centrifuge, wash and dry at 100 °C
Centrifuge, wash and dry at 100 °C
Separate the granules in a centrifuge and wash them with 1 % hydrochloric acid, water, 2 % ammonia solution, and repeatedly with water. Dry them at 100 °C.
Ibikoresho bikenewe:
Santirifuje y’igiseke
Asidi ya kloridiri
Umuti wa amoniyake wagabanyijwe
Ifuru yo kumishahoIbikoresho
2- 100 parts by weightUmwanya
- 1 part by weightUmwanya
Ibikoresho bikenewe
11- Umwanya
- Umwanya
- Umwanya
- Umwanya
- Umwanya
- Umwanya
- Umwanya
- Umwanya
Iki gishushanyo gikora
Blueprint zijyanye
Izi blueprint zisangira ubumenyi — uburyo, ibikoresho cyangwa amahame
CC0 Umurenge rusange
Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.
Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.