UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
Leather Strips and Straps
Belts, handles, laces and hinges start as strips cut from a side of firm vegetable-tanned leather. A strap cutter holds the width while you draw it along a straight edge; the edges are then bevelled, sanded and burnished smooth with a little gum and friction so they do not fray or fuzz.
Firm leather about 3–4 mm thick suits straps; thinner leather suits laces and binding strips.
Utangiye
1 hour
Amabwiriza
1
1
The leather
The leather
How the firm, vegetable-tanned leather is made.
2
2
Cut a straight edge
Cut a straight edge
Lay the leather grain side up on the cutting mat and cut one long straight edge along the straightedge, following the backbone line where the leather is most even.
Ibikoresho by'iyi ntambwe:
Uruhu rwatunganyijwe n'ibimera0.1 sqmIbikoresho bikenewe:
Agapimo kagororotse
Icyuma gikata cy'akazi
Umukeka wo gukatiraho wikiza
Ikigereranyo cya Digitale cy'Amasentimetero 63
3
Pull the strips
Pull the strips
Set the strap cutter to the width, run its fence against the straight edge and pull it along the leather in one steady draw. Repeat for each strip.
Ibikoresho bikenewe:
Igikata Umukandara
Umugozi wo Gupima4
4
Bevel the edges
Bevel the edges
Run the edge beveler along both corners of each edge, front and back.
Ibikoresho bikenewe:
Igikata impande z'uruhu5
5
Sand and burnish
Sand and burnish
Sand the edges smooth, dampen them with a little gum tragacanth in water, and rub hard with the wooden slicker until they shine. A touch of beeswax finishes them.
Ibikoresho by'iyi ntambwe:
Goma ya tragakante (kitre)5 g
Amazi0.05 litiro
Igishashara5 gIbikoresho bikenewe:
Urupapuro rwo kunoza
Igikoresho cyo gusiga impande z'uruhu6
6
Punch and finish
Punch and finish
Cut the ends to shape and punch any holes the strap needs.
Ibikoresho bikenewe:
Agatsiko k'ibitobora uruhuIcyuma gikata cy'akazi7
7
Troubleshooting
Troubleshooting
Strap cutting troubleshooting.
Flow
Loading...
Ibikoresho
4- Umwanya
- Umwanya
- 0.05 litiroUmwanya
- 5 gUmwanya
Ibikoresho bikenewe
10- Umwanya
- Umwanya
- Umwanya
- Umwanya
- 1 vendor sell this, none ship to you yetUmwanya
- Umwanya
- Umwanya
- Umwanya
Iki gishushanyo gikora
Blueprint zijyanye
Izi blueprint zisangira ubumenyi — uburyo, ibikoresho cyangwa amahame
CC0 Umurenge rusange
Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.
Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.