التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Acrylic Block: Methyl Methacrylate Syrup Cast in Layers between Glass
Charlie

أنشأه

Charlie

20. أكتوبر 2026DE
11
0
0
0
0

Acrylic Block: Methyl Methacrylate Syrup Cast in Layers between Glass

A thick acrylic block cannot be cast flawless in one pour. Tattersall (ICI, US 2,071,907, 1937) built it up in layers: pour 1/2 inch of syrup on a level glass plate, let it set for a day at room temperature, pour the next 1/2 inch on top, cover with a second glass plate, wait another day, then heat the sandwich at 80 °C. Each 1/2 inch layer shrinks to about 1/3 inch. The glass gives both faces a finished polish with no grinding. The picture: our diagram.
متوسط
3 days

التعليمات

1

Level the bottom plate

Set a glass plate on a ledge in a wooden frame, on a body of plaster of Paris, and level it carefully. The example sheet was 10 by 18 inches.

الأدوات المطلوبة:

لوح زجاج نافذةلوح زجاج نافذة
إطار خشبيإطار خشبي
جبس باريسجبس باريس
ميزان ماءميزان ماء
2

Pour the first 1/2 inch

Pour room-temperature syrup 1/2 inch deep (about 1.5 litres for 10 by 18 inches; our figure). Cover against dust, but do not put the top plate on yet. Leave 24 hours at about 20 °C.

المواد لهذه الخطوة:

شراب ميثاكريلات الميثيلشراب ميثاكريلات الميثيل3 l

الأدوات المطلوبة:

قفازات مطاطيةقفازات مطاطية
ميزان حرارة مختبريميزان حرارة مختبري
3

Pour the next layer and cover

Pour a second 1/2 inch layer on the first. Lower the top glass plate onto it so it rests on the syrup and keeps pressing on it. Leave another 24 hours at about 20 °C. For a thicker block repeat the layers, a day apart, and put the plate on the last one.

الأدوات المطلوبة:

لوح زجاج نافذةلوح زجاج نافذة
4

Heat at 80 °C

Take the glass sandwich out of the frame and heat it for three hours at 80 °C to finish the polymerisation.

الأدوات المطلوبة:

فرن تجفيففرن تجفيف
ميزان حرارة مختبريميزان حرارة مختبري
قفّازات مقاومة للحرارةقفّازات مقاومة للحرارة
5

Spring off the glass

Spring the glass plates off the block with a knife blade. Both faces come out smooth and polished.

الأدوات المطلوبة:

سكين حِرَفيةسكين حِرَفية
قفازات مطاطيةقفازات مطاطية

المواد

1

الأدوات المطلوبة

9

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...