التعاون

فنون

الجمال والعناية

حِرَف

الثقافة والتاريخ

ترفيه

البيئة

الطعام والمشروبات

الهندسة العكسية

العلوم

رياضة

التقنية

الأجهزة القابلة للارتداء

Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)

Melvin E. Swindell · Public domain (US patent drawing)

أنشأه

Emma

3. نوفمبر 2026

Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)

A simple dust mask for workshops and plants. A rigid cup with air holes covers the nose and mouth. A cloth filter lines the inside and folds over the cup's rim, held by wire clips: the air passes through the cloth, and the cloth also pads the rim against the face. Change the cloth and the same mask can pass from worker to worker. Result: a nose-and-mouth dust mask with a filter you can replace. Source: M. E. Swindell, US 2,681,060 (1954). Unknown: sizes, how the cup is formed, the cloth. Picture: the patent drawing.

مبتدئ

Unknown

التعليمات

Make the guard

Make a rigid cup to cover the nose and mouth, of composition rubber, plastic, metal or another suitable material. Give it a narrow upright bulge at the front for the nose. Shape its edge to the face so it fits close at the bridge of the nose and the chin, and turn the whole edge outward as a curved lip. Make air holes in both the nose bulge and the mouth part. Not given: sizes, the number of holes, how it is formed.

المواد لهذه الخطوة:

مادة غير معروفة1 guard

الأدوات المطلوبة:

مثقب يدوي

أبعاد غير معروفة

Fit the filter clips

Bend several clips of springy wire and rivet them to the guard near its edge, so each can press down on the back of the lip. Ours: spring steel wire. Not given: how many clips.

المواد لهذه الخطوة:

سلك فولاذ زنبركي1 clips

معدن غير معروف1 rivets

الأدوات المطلوبة:

زرادية مستديرة الفك

طقم برشمة

Make the head strap

Cut an elastic strap to go round the head and fit a hook at each end. The hooks catch in a pair of the guard's air holes. Not given: the length, the hook metal.

المواد لهذه الخطوة:

حبل مطاطي1 strap

معدن غير معروف1 two hooks

الأدوات المطلوبة:

مقص

زرادية مستديرة الفك

Fit the filter and wear it

Lay a cup-shaped cloth filter in the hollow of the guard. Fold its edges over the lip and clamp them to the back of the lip with the clips. The cloth leaves an air space in front of the face and one between itself and the guard, and it pads the lip where it touches the face. Hook the strap into the holes and put the mask over the nose and mouth. Replace the cloth when it is used, or before the mask passes to another wearer. Not given: the cloth.

المواد لهذه الخطوة: