فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Spring Steel Strip and Wire, Hardened and Tempered
A spring must bend and come back. Mild steel bends and stays bent; high-carbon steel, hardened and then tempered to a blue colour, springs back. The strip or wire is shaped soft, heated until a magnet no longer sticks to it, quenched in warm oil to harden it, then tempered: cleaned bright and heated gently until the colour runs to blue.
It starts from high-carbon crucible steel. Wire is drawn while the steel is still annealed.
متقدم
A day
التعليمات
1
1
Forge strip
Forge strip
Forge crucible steel at a yellow heat into strip, smoothing it with the flatter; never work it below red. Cut it to length while hot.
المواد لهذه الخطوة:
فولاذ البوتقة1 كغ
فحم نباتي10 كغالأدوات المطلوبة:
كور الحدّاد
سندان
مطرقة الحداد
أداة تسوية السطح
كمّاشة الحداد
مئزر جلدي
قفازات لحام
نظارات أمان2
2
Anneal
Anneal
Heat to a dull red and bury it in dry wood ash to cool slowly overnight.
المواد لهذه الخطوة:
رماد خشب صلب2 كغالأدوات المطلوبة:
دلو معدني3
3
Draw wire
Draw wire
For wire, forge a rod, anneal it, and draw it through the drawplate with wax, annealing after every hole. Coil or bend the springs now, while it is soft.
المواد لهذه الخطوة:
شمع النحل10 غالأدوات المطلوبة:
لوح سحب الأسلاك الفولاذي
كمّاشة سحب
ملزمة منضدة4
4
Harden
Harden
Heat the part evenly until a magnet no longer sticks, then plunge it into a lidded bucket of warm rapeseed oil and stir it. Keep the lid at hand for flare-ups.
المواد لهذه الخطوة:
زيت اللفت5 لتراتالأدوات المطلوبة:
كور الحدّاد
مغناطيس
دلو معدني بغطاء
كمّاشة الحداد
قفازات لحام5
5
Clean bright
Clean bright
Sand a stripe bright on the hardened steel so you can see the temper colours.
الأدوات المطلوبة:
لوح ورق صنفرة6
6
Temper to blue
Temper to blue
Heat it gently and evenly with the torch on fire bricks, or on a hot plate of steel, and watch the colours run straw, bronze, purple, blue. Stop at an even blue and let it cool.
الأدوات المطلوبة:
موقد بروبان
طوبة حرارية
كمّاشة الحداد7
7
Test
Test
Clamp one end in the vise and bend the free end a little: it must spring back straight.
الأدوات المطلوبة:
ملزمة منضدة
قدمة رقمية 6 بوصات8
8
Troubleshooting
Troubleshooting
Spring tempering troubleshooting.
Flow
Loading...
المواد
5- 1 كغعنصر نائب
- 10 كغعنصر نائب
- 2 كغعنصر نائب
- 10 غعنصر نائب
- 5 لتراتعنصر نائب
الأدوات المطلوبة
18- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.





