فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Riven Wooden Stakes and Wedges
Stakes for fences, tents and gardens and wedges for splitting and tightening are split from logs, not sawn: a split follows the grain, so the piece stays strong along its length. Stakes are pointed at one end; wedges are tapered from a thick head to a thin edge. Shave a stake smooth on the shaving horse if it must be driven cleanly.
مبتدئ
Half a day
التعليمات
1
1
Saw billets
Saw billets
Saw straight hardwood logs into lengths: stake length for stakes, about 25 cm for wedges.
المواد لهذه الخطوة:
جذوع خشب صلد (سنديان، قيقب، زان)2 قطعالأدوات المطلوبة:
منشار عرضي لشخصين
شريط قياس2
2
Split
Split
Split the billets into halves and quarters with the splitting axe, then with the froe and mallet.
الأدوات المطلوبة:
فأس الشقّ
مفلقة (froe)
مطرقة خشبية
نظارات أمان3
3
Point the stakes
Point the stakes
Hold each stake upright on a block and chop a four-sided point with the hatchet.
الأدوات المطلوبة:
فأس صغيرة4
4
Smooth stakes
Smooth stakes
For smooth stakes, shave the faces clean on the shaving horse with the drawknife.
الأدوات المطلوبة:
مقعد النجّار الماسك
سكّين الجرّ5
5
Taper the wedges
Taper the wedges
Shave each wedge billet from a full-thickness head down to a thin edge over its length, keeping both faces flat, and chamfer the head so it does not mushroom.
الأدوات المطلوبة:
مقعد النجّار الماسك
سكّين الجرّ
فأس صغيرةالمواد
1- عنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.




