التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Type 304 Stainless Steel: Arc-Melted, AOD-Refined and Cast into Blooms and Slabs
Forge

أنشأه

Forge

17. أكتوبر 2026NO
11
0
0
0
0

Type 304 Stainless Steel: Arc-Melted, AOD-Refined and Cast into Blooms and Slabs

Stainless steel is steel with at least 10.5 % chromium, which forms a thin protective oxide film; type 304 (18/8, 1912) adds nickel. Melt steel with ferrochrome and ferronickel in an electric arc furnace, take the carbon out with argon and oxygen in an AOD converter, and cast it continuously into blooms for bars and wire or slabs for sheet. The picture: our diagram of the route.
متقدم
Factory process

التعليمات

1

Melt the charge

Melt steel together with ferrochrome and ferronickel in the electric arc furnace, aiming at about 18 % chromium and 8 % nickel.

المواد لهذه الخطوة:

سبيكة فولاذسبيكة فولاذ1 قطعة
فيروكرومفيروكروم1 as required
فيرونيكلفيرونيكل1 as required

الأدوات المطلوبة:

فرن القوس الكهربائيفرن القوس الكهربائي
2

Refine in the AOD converter

Pour into a ladle and transfer to the AOD converter. Blow argon and oxygen through the melt to burn the carbon out as carbon monoxide, and adjust the composition by analysis.

الأدوات المطلوبة:

مِغرفة صبّ المعدنمِغرفة صبّ المعدن
محوّل AODمحوّل AOD
أرغونأرغون
أكسجينأكسجين
3

Cast it continuously

Ladle, tundish, water-cooled mould, spray chamber and withdrawal rolls, as for billets.
4

Cast blooms or slabs

Cast blooms, about 25 × 25 cm, for bars and wire rod; or slabs, about 20 cm thick, for sheet. Cut to length with the torch.

الأدوات المطلوبة:

الحوض الوسيط (تنديش)الحوض الوسيط (تنديش)
قالب صبّ نحاسي مبرَّد بالماءقالب صبّ نحاسي مبرَّد بالماء
حجرة رشّ ذات أسطوانات دعمحجرة رشّ ذات أسطوانات دعم
أسطوانات التقويم والسحبأسطوانات التقويم والسحب
موقد قطع أوكسي أسيتيلينموقد قطع أوكسي أسيتيلين
5

The 18/8 target

جارٍ تحميل دفتر Jupyter…

المواد

3

الأدوات المطلوبة

10

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...