فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Wooden Barrel: Bulged Oak Staves Bent by Fire, with Two Heads
Woody

أنشأه

Woody

14. أكتوبر 2026NO
11
0
0
0
0

Wooden Barrel: Bulged Oak Staves Bent by Fire, with Two Heads

A barrel is the cooper's closed vessel: oak staves held by hoops, bulging at the middle, with flat heads set in grooves at both ends. Coopers heat the staves to bend them. Shape staves wider at the middle than the ends, raise them in a hoop, heat them over a small fire and draw the open end together, drive the hoops, and fit the heads. The picture: a new oak barrel in a cooper's workshop, with iron hoops on the floor.
متقدم
Several days

التعليمات

1

Shape the staves

Rive and shave oak staves as for the vat, but taper each from the middle toward both ends, and hollow the inside face a little.

المواد لهذه الخطوة:

لوح خشب صلبلوح خشب صلب8 قطع

الأدوات المطلوبة:

مفلقة (froe)مفلقة (froe)
مقعد النجّار الماسكمقعد النجّار الماسك
سكّين الجرّسكّين الجرّ
فارة يدويةفارة يدوية
2

Raise and fire

Stand the staves inside one hoop to form a skirt. Light a small charcoal fire inside, wet the outside, and as the staves warm, draw the open end together with a rope round it until a hoop can be driven on.

المواد لهذه الخطوة:

فحم نباتيفحم نباتي3 as required
ماءماء10 لترات

الأدوات المطلوبة:

طوق حديدطوق حديد
حبل متينحبل متين
مطرقة ذات رأس إسفيني عرضيمطرقة ذات رأس إسفيني عرضي
قفّازات مقاومة للحرارةقفّازات مقاومة للحرارة
3

Hoops

Drive the rest of the iron hoops on, two near each end and two at the quarters, until the joints close tight.

المواد لهذه الخطوة:

طوق حديدطوق حديد6 قطع

الأدوات المطلوبة:

مطرقة ذات رأس إسفيني عرضيمطرقة ذات رأس إسفيني عرضي
4

Ends and grooves

Level the ends and bevel the inside edge with the adze, then cut a groove round the inside near each end.

الأدوات المطلوبة:

قدومقدوم
طقم أزاميلطقم أزاميل
5

Heads and bung

Join planks into two boards, scribe circles to fit the grooves, cut and bevel them, slack the end hoops and spring the heads in. Bore a bung hole in the middle stave. Fill with water to swell it tight.

المواد لهذه الخطوة:

لوح خشب صلبلوح خشب صلب2 قطع
ماءماء50 لترات

الأدوات المطلوبة:

فرجار سنّيفرجار سنّي
منشار يدويمنشار يدوي
فارة يدويةفارة يدوية
مطرقة ذات رأس إسفيني عرضيمطرقة ذات رأس إسفيني عرضي
مثقب يدويمثقب يدوي
6

Capacity of a barrel

جارٍ تحميل دفتر Jupyter…

المواد

4
  • عنصر نائب
  • 3 as required
    عنصر نائب
  • 60 لترات
    عنصر نائب
  • عنصر نائب

الأدوات المطلوبة

13

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...