การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
The Centre-Fire Cartridge With an Anvil (Boxer, 1866-1869) - History and How It Works
Charlie

สร้างโดย

Charlie

13. พฤศจิกายน 2026DE
3
0
0
0
0

The Centre-Fire Cartridge With an Anvil (Boxer, 1866-1869) - History and How It Works

เริ่มต้น
About 15 minutes

คำแนะนำ

1

Read Boxer's patent

His first claim is for "constructing the anvil to cartridges for breech loading fire-arms with shoulders or projections, so formed as to abut against the edge of the percussion cap, and thus to prevent its entering the cap to such an extent as to cause the ignition ... except when the cap is acted upon by the striker of the gun" (US 91,818, dated 29 June 1869; patented in England 13 October 1866).
2

How it works, in principle

In a centre-fire cartridge the cap is in the middle of the base. When the gun's striker dents the cap, it is crushed against the anvil and fires, and the flame passes into the case. Boxer shaped the anvil so that, until the striker hits, it cannot be pushed far enough into the cap to fire it.
3

Why it mattered

A cartridge that only fires when struck by the gun is safer to carry, ship and handle. Centre-fire cartridges with the cap in the middle of the base became the usual design for rifles and pistols.
4

Honest limits

From the text of US 91,818 (1869). Boxer's patent also describes the construction of the case; that is not covered here. This page gives no dimensions, compositions, charges or making steps, by design.

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...