การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)
H. J. Blacklidge's bobsled from The Boy Mechanic, Book 2 (1915): "any boy who can drive a nail and bore a hole can have a bobsled on short notice." Four barrel staves make the runners of two short bobs under a 4 ft board; the front bob turns on a centre bolt and is steered by a rope.
เริ่มต้น
About 3 hours
คำแนะนำ
1
1
His list in centimetres
His list in centimetres
กำลังโหลดสมุด Jupyter…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
The materials: four good, solid barrel staves; four blocks 4 in long, 4 in wide and 2 in thick; two pieces 12 in long, 4 in wide and 1 in thick; one piece 12 in long, 2 in wide and 1-3/4 in thick; and a good board 4 ft long, 12 in wide and 1 in thick.
3
3
Make the two bobs
Make the two bobs
Make each crosspiece-and-knee unit from one 12 x 4 x 1 in piece and two of the blocks, as in his figure, and nail a barrel stave to each side for runners.
วัสดุสำหรับขั้นตอนนี้:
แผ่นไม้ถังไม้4 ชิ้น
แผ่นไม้สน1 ชิ้น
แผ่นไม้เนื้อแข็ง1 ชิ้น
ตะปู1 ชิ้นเครื่องมือที่ต้องใช้:
เลื่อยมือ
ค้อน
ดินสอ
ตลับเมตร4
4
Fit the bobs to the board
Fit the bobs to the board
Fasten one bob to one end of the board. Attach the other at the centre of its crosspiece with a bolt, so it can turn. Fasten the 1-3/4 by 2 in piece, 12 in long, across the top of the board at the front end.
วัสดุสำหรับขั้นตอนนี้:
แผ่นไม้สน1 ชิ้น
แผ่นไม้เนื้อแข็ง1 ชิ้น
สลักเกลียวหัวกลม1 ชิ้น
แหวนรองแบน2 ชิ้น
ตะปู1 ชิ้นเครื่องมือที่ต้องใช้:
สว่านมือหมุนพร้อมดอก
เลื่อยมือ
ค้อน5
5
Fit the steering rope
Fit the steering rope
Fasten a rope to the knees of the front runners; it steers the sled.
วัสดุสำหรับขั้นตอนนี้:
เชือกฝ้ายตีเกลียว1 ชิ้นเครื่องมือที่ต้องใช้:
สว่านมือหมุนพร้อมดอก6
6
Troubleshooting
Troubleshooting
Bobsled troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "An Inexpensive Bobsled" by H. J. Blacklidge, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 49). Which end of the board gets the bolted bob, the bolt size and the stave length come only from his figure or are not given. The tools and metric figures are ours.
วัสดุ
7- 4 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


