การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Self-Righting Jumping Hurdle: Off-Centre Pivoted Swing Between Two Standards (Boy Mechanic, 1915)
Woody

สร้างโดย

Woody

13. พฤศจิกายน 2026NO
8
0
0
0
0

Self-Righting Jumping Hurdle: Off-Centre Pivoted Swing Between Two Standards (Boy Mechanic, 1915)

C. C. Fraser's hurdle from The Boy Mechanic, Book 2 (1915): a 36 by 18 in swing hung on long nails slightly off centre between two standards joined by a reach. It turns at the slightest touch of the jumper's foot and rights itself again.
เริ่มต้น
About 2 hours

คำแนะนำ

1

His cutting list in centimetres

กำลังโหลดสมุด Jupyter…
2

Read The Boy Mechanic, Book 2

"The hurdle consists of two standards, a reach, and a swing."
3

Make the swing

Nail four pieces about 7/8 in thick and 1-1/2 in wide into a rectangle: two 36 in long and two 18 in long.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้สนแผ่นไม้สน1 ชิ้น
ตะปูตะปู1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
ค้อนค้อน
ตลับเมตรตลับเมตร
ดินสอดินสอ
4

Make the standards and reach

Make each standard of three pieces 7/8 in thick, 3 in wide and 18 in long, nailed firmly together as in his figure, and join their bases with a reach of the same stuff, 36 in long.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้สนแผ่นไม้สน1 ชิ้น
ตะปูตะปู1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
ค้อนค้อน
ตลับเมตรตลับเมตร
5

Hang the swing

Bore a hole in each standard large enough for a long nail to turn freely but too small for its head to pass, and hang the swing on the nails at its ends, slightly off centre, so it swings at a touch and rights itself.

วัสดุสำหรับขั้นตอนนี้:

ตะปูตะปู1 ชิ้น

เครื่องมือที่ต้องใช้:

สว่านมือสว่านมือ
ค้อนค้อน
6

Troubleshooting

Hurdle troubleshooting.

Flow

Loading...
7

History and honest limits

From "How to Make a Hurdle" by C. C. Fraser, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 145). How far off centre the pivots go is not given. The tools and metric figures are ours.

วัสดุ

2
  • ตัวยึดตำแหน่ง
  • 3 ชิ้น
    ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

5
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • 1 vendor sell this, none ship to you yet
    ตัวยึดตำแหน่ง
  • 1 vendor sell this, none ship to you yet
    ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...