การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
เริ่มต้น
Unknown
คำแนะนำ
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
วัสดุสำหรับขั้นตอนนี้:
เหล็กแบนกล้าละมุน1 turning toolsเครื่องมือที่ต้องใช้:
เลื่อยตัดเหล็ก
ค้อน
ทั่ง
ตะไบโลหะ2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
วัสดุสำหรับขั้นตอนนี้:
แผ่นไม้สน1 board support
เดือยไม้1 turning stick
ตะปูเหล็ก1 stick pointเครื่องมือที่ต้องใช้:
เลื่อยตัดเหล็ก
ตะไบโลหะ
ค้อน3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
วัสดุสำหรับขั้นตอนนี้:
แผ่นไม้เนื้อแข็งหนา1 ribsเครื่องมือที่ต้องใช้:
เลื่อยตัดเหล็ก
ตะไบโลหะวัสดุ
5- 1 turning toolsตัวยึดตำแหน่ง
- 1 board supportตัวยึดตำแหน่ง
- 1 turning stickตัวยึดตำแหน่ง
- 1 stick pointตัวยึดตำแหน่ง
- 1 ribsตัวยึดตำแหน่ง
วัสดุจากพิมพ์เขียวที่เชื่อมต่อ

การระบุ 10%
Mild Steel Bar Stock Forged from an Ingot
โดย Forge
ยุคใหม่
46
0
0
0
5
0

การระบุ 10%
Pine Boards with a Chainsaw Mill
โดย Woody
งานไม้
47
0
0
0
1
0

การระบุ 10%
Riven Hardwood Dowels with a Dowel Plate
โดย Woody
งานไม้
59
0
0
0
1
0

การระบุ 10%
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
โดย Forge
เล็บ
63
0
0
0
3
0
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้
