การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Copper-Oxide and Zinc Cell in Caustic Soda: 10 Hours at over an Ampere (Boy Mechanic, 1913)
Volt

สร้างโดย

Volt

14. พฤศจิกายน 2026SE
10
0
0
0
0

Copper-Oxide and Zinc Cell in Caustic Soda: 10 Hours at over an Ampere (Boy Mechanic, 1913)

A strong, steady wet cell for experiments: black copper oxide with a little manganese oxide and iron filings in a tin can at the bottom of a jar, a zinc hung above it, and 10 per cent caustic soda under a film of oil; it gives over an ampere for about 10 hours.
ระดับกลาง
An hour

คำแนะนำ

1

Recipe in metric

กำลังโหลดสมุด Jupyter…
2

Read the Boy Mechanic

"A cell of battery that will run 10 hours with an output of over 1 ampere can be made as follows."
3

Bottom electrode

Solder a connecting wire to the lower half of a tin can and set it in the bottom of a jar about 4 in across and 8 in high. Fill the can with 2 oz black copper oxide, 1 oz black manganese oxide and some iron filings.

วัสดุสำหรับขั้นตอนนี้:

โหลแก้วโหลแก้ว1 ชิ้น
กระป๋องดีบุกกระป๋องดีบุก1 ชิ้น
ลวดทองแดงลวดทองแดง1 ชิ้น
ตะกั่วบัดกรีดีบุก-ตะกั่วตะกั่วบัดกรีดีบุก-ตะกั่ว1 ชิ้น
คอปเปอร์ออกไซด์คอปเปอร์ออกไซด์1 ชิ้น
แมงกานีสไดออกไซด์ (ไพโรลูไซต์)แมงกานีสไดออกไซด์ (ไพโรลูไซต์)1 ชิ้น
ผงตะไบเหล็กผงตะไบเหล็ก1 ชิ้น

เครื่องมือที่ต้องใช้:

หัวแร้งบัดกรีหัวแร้งบัดกรี
4

Zinc

Hang a small zinc (he used a crowfoot zinc) about 1 in above the half can, its wire led out of the jar.

วัสดุสำหรับขั้นตอนนี้:

แผ่นสังกะสีแผ่นสังกะสี1 ชิ้น
ลวดทองแดงลวดทองแดง1 ชิ้น
5

Electrolyte

Wearing goggles and gloves, fill the jar to within 1 in of the top with 10 per cent caustic soda solution, then float a thin layer of kerosene or paraffin oil on top to keep out the air.

วัสดุสำหรับขั้นตอนนี้:

โซเดียมไฮดรอกไซด์ สารละลาย 10 %โซเดียมไฮดรอกไซด์ สารละลาย 10 %1 ชิ้น
น้ำมันก๊าดน้ำมันก๊าด1 ชิ้น

เครื่องมือที่ต้องใช้:

แว่นครอบตากันสารเคมีกระเด็นแว่นครอบตากันสารเคมีกระเด็น
ถุงมือกันสารเคมีถุงมือกันสารเคมี
6

Renew

When exhausted, siphon off the oil first, then renew the solution and the oxide.

วัสดุสำหรับขั้นตอนนี้:

โซเดียมไฮดรอกไซด์ สารละลาย 10 %โซเดียมไฮดรอกไซด์ สารละลาย 10 %1 ชิ้น
คอปเปอร์ออกไซด์คอปเปอร์ออกไซด์1 ชิ้น

เครื่องมือที่ต้องใช้:

ท่อกาลักน้ำท่อกาลักน้ำ
7

Troubleshooting

Cell troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), pp. 150-151, by Robert Canfield (checked on the archive.org scan boymechanic0000unse_n5a8). Metric figures, the Lalande-type note and safety gear are ours.

วัสดุ

10

เครื่องมือที่จำเป็น

4

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...