ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Cracked C4 Cut: Cracking-Still Gas Liquefied and Split in Four Columns at 200 psi (Eastman, Texas Co., US 2,014,724)
Charlie

สร้างโดย

Charlie

29. ตุลาคม 2026DE
1
0
0
0
0

Cracked C4 Cut: Cracking-Still Gas Liquefied and Split in Four Columns at 200 psi (Eastman, Texas Co., US 2,014,724)

The gas from a cracking still is a mixture of light hydrocarbons. Compress it, chill it until it liquefies, and run it through four columns in turn: each column sends one group off its top, and the fourth gives the butanes and butylenes together, the C4 cut. Result: a liquefied butane-butylene cut. Eastman does not give its composition. Source: Eastman, US 2,014,724 (1935). Not given: the cut's make-up, how the impurities are removed, the refrigerant. The gas from Burton's still is used here as the same kind of cracking-still gas. Extremely flammable gases under pressure. Picture drawn by Youblob.
ผู้เชี่ยวชาญ
1 day

คำแนะนำ

1

Clean the cracking-still gas

Take the gas from a cracking still, preferably after its gasoline has been separated and impurities such as hydrogen sulfide, carbon dioxide and water removed. Eastman does not say how they are removed.

วัสดุสำหรับขั้นตอนนี้:

แก๊สจากการแครกแก๊สจากการแครก1 as required

เครื่องมือที่ต้องใช้:

ถังก๊าซความดันถังก๊าซความดัน
2

Compress and chill it until it liquefies

Compress the gas, then cool it far enough that it liquefies almost completely.

เครื่องมือที่ต้องใช้:

เครื่องอัดก๊าซเครื่องอัดก๊าซ
หอกลั่นแบบไครโอเจนิกหอกลั่นแบบไครโอเจนิก
เกจวัดความดันเกจวัดความดัน
3

Take off methane and hydrogen, then the C2s

Run the liquid through a series of fractionating columns at about 200 lbs per square inch. Methane and hydrogen escape from the top of the first column, at about -100 °F; ethylene and ethane from the second, at about -25 °F. Eastman burns the methane and hydrogen as fuel in his cracking furnaces.

เครื่องมือที่ต้องใช้:

หอกลั่นแบบไครโอเจนิกหอกลั่นแบบไครโอเจนิก
เกจวัดความดันเกจวัดความดัน
4

Take off propane and propylene

Propane and propylene leave the top of the third column, at about +100 °F.

เครื่องมือที่ต้องใช้:

หม้อกลั่นลำดับส่วนหม้อกลั่นลำดับส่วน
เกจวัดความดันเกจวัดความดัน
5

Take the butanes and butylenes from the fourth column

The butane and butylene come off the top of the fourth column, at about +200 °F under the same pressure. This is the C4 cut. Ours: condense it into pressure cylinders.

เครื่องมือที่ต้องใช้:

หม้อกลั่นลำดับส่วนหม้อกลั่นลำดับส่วน
เกจวัดความดันเกจวัดความดัน
ถังก๊าซความดันถังก๊าซความดัน

วัสดุ

1

เครื่องมือที่จำเป็น

5

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...