การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

German Harness Leather: Limed, Bated and Bark-Tanned Hides Greased With Linseed Oil and Tallow (Davis, 1885)
How German tanners made harness leather, from C. T. Davis's The Manufacture of Leather (1885): green hides soaked, limed twice, unhaired, fleshed and bated, tanned in old liquor and fresh tan with lay-aways until the cut is brown through, split into sides, smoothed, and greased on the flesh side with linseed oil and tallow; then sold brown or blacked with logwood and iron black.
ขั้นสูง
Several months
คำแนะนำ
1
1
His schedule
His schedule
กำลังโหลดสมุด Jupyter…
2
2
Read The Manufacture of Leather, ch. XXXI
Read The Manufacture of Leather, ch. XXXI
"Special attention should be paid to this process, as soft leather can only be produced by proper bating, while too much bating is injurious, as it destroys the skin fibres and the grain."
3
3
Soak and lime
Soak and lime
Use green hides if possible. Cut out the horns, soak in running water 6 to 8 hours with frequent rinsing (not longer, or water-stripes form), clean off dung, and lay in weak milk of lime for 24 hours; take out, make fresh lime and replace for 24 hours more, then handle regularly. Salted hides need 3 days' soaking to remove all salt; dried hides are soaked and stretched back to shape.
วัสดุสำหรับขั้นตอนนี้:
หนังดิบ1 ชิ้น
ปูนขาวที่หมักแล้ว1 ชิ้นเครื่องมือที่ต้องใช้:
บ่อฟอกหนัง
มีดตัดหนัง4
4
Unhair, flesh and bate
Unhair, flesh and bate
Unhair as soon as the hair pulls out easily, soak a few hours, flesh, soak 24 hours and smooth. Bate for 1 to 3 days by thickness and weather, handling three times a day; neither too little nor too much. Rinse, smooth again, soak several hours and work the flesh side thoroughly with a dull fleshing knife.
เครื่องมือที่ต้องใช้:
ท่อนไม้ขูดหนัง
มีดขูดเนื้อออกจากหนัง
บ่อฟอกหนัง5
5
Tan
Tan
Lay the hides in old liquor 1 or 2 days. Take them out, ladle out the old tan, add one third of a bushel of fresh tan and replace; the tan is spent in 4 to 8 days, so freshen the vat two or three times more. Then put them in the lay-aways, about as long as sole leather (stout harness leather may need longer). Split a hide after the second layer: uniformly brown through means tanned; pale yellow or white means not.
วัสดุสำหรับขั้นตอนนี้:
เปลือกไม้โอ๊ก (บดหยาบ)4 ชิ้นเครื่องมือที่ต้องใช้:
บ่อฟอกหนัง
มีดตัดหนัง6
6
Split, smooth and grease
Split, smooth and grease
Split into sides and number both halves alike. Rinse in old ooze and smooth with a dull fleshing knife on the beam. Choose the best hides for harness. Go over the leather with a fine-edged knife, grease the flesh side with linseed oil and tallow, and hang it up to dry.
วัสดุสำหรับขั้นตอนนี้:
น้ำมันลินสีด1 ชิ้น
ไขสัตว์1 ชิ้นเครื่องมือที่ต้องใช้:
ท่อนไม้ขูดหนัง
มีดขูดเนื้อออกจากหนัง
มีดตัดหนัง
แปรงทาสีหน้ากว้าง7
7
Finish brown or black
Finish brown or black
Sort into brown and black. Brown is sold as it is or given lustre by glassing. Black is grounded with a decoction of logwood, blacked with iron black and, when nearly dry, pressed.
วัสดุสำหรับขั้นตอนนี้:
ชิ้นไม้ล็อกวูด1 ชิ้นเครื่องมือที่ต้องใช้:
แปรงทาสีหน้ากว้าง
หม้อใบใหญ่8
8
Troubleshooting
Troubleshooting
Harness leather troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Charles Thomas Davis, **The Manufacture of Leather** (Philadelphia, 1885), chapter XXXI (checked on the archive.org scan manufactureoflea01davi, pp. 518-521). He does not give the bate's composition, which tan, or the lime and oil-and-tallow quantities here; oak bark for the tan is our choice. The diagram hero and the tools are ours.
วัสดุ
6- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 4 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

