ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Double-Acting Swing Dash Churn: Two Dasher Strokes From Every Swing
Martin

สร้างโดย

Martin

6. ตุลาคม 2026NO
16
0
0
0
0

Double-Acting Swing Dash Churn: Two Dasher Strokes From Every Swing

The Davises doubled the work a swinging churn gets from each swing. William F. Davis and Nathan Davis of Castleton, Vermont, received US 9,416, dated 23 November 1852, for "The Oscillating Double-Acting Dash-Churn": a tank hung in a pendulum frame between standards three and a half feet long; a connecting board pinned to one pendulum bar, slotted to slide on the rock shaft, carrying two pins that enter two opposite notches in a wheel fixed to the rock shaft; and a lever from the rock shaft to a hollow dash stick with a valve "for the purpose of preventing a vacuum underneath the dash." This rung works out the strokes, then prints the notched wheel and connecting board, builds the frame and swing, and makes butter.
ขั้นสูง
About 6 hours, plus printing

คำแนะนำ

1

Strokes per minute

กำลังโหลดสมุด Jupyter…
2

The swing churn it doubles

The embedded blueprint gives one dasher stroke per swing through a bent lever. The Davises' notched wheel and two-pinned board give two.
3

Read US 9,416

"As the swing moves from the center toward the left and back the upper pin leaves the upper notch and the lower pin enters its respective notch, producing substantially the same result as when the upper pin entered the upper notch and passed toward the right and back. Thus we produce two complete motions of the dash from one full oscillation of the pendulum bars."
4

Print the parts

Print the notched wheel (/uploads/blueprints/double-acting-swing-dash-churn-notched-wheel.stl) and the connecting board with its slot and two pins (/uploads/blueprints/double-acting-swing-dash-churn-connecting-board.stl). Reuse the dasher and valve plug from the pendulum swing dash churn if you have them. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

วัสดุสำหรับขั้นตอนนี้:

เส้นใย PETGเส้นใย PETG1 ชิ้น

เครื่องมือที่ต้องใช้:

เครื่องพิมพ์สามมิติแบบเส้นใย (FDM)เครื่องพิมพ์สามมิติแบบเส้นใย (FDM)
5

Frame and swing

Build two pine A-frames about 520 mm tall joined at the top, with diagonal cross pieces carrying the rock shaft, and hang a swing of two pine bars and a plywood board from a rod at the top. Stand a straight-sided food-grade container on the board as the tank.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้สนแผ่นไม้สน1 ชิ้น
แผ่นไม้อัดแผ่นไม้อัด1 ชิ้น
แท่งเหล็กกลมคาร์บอนต่ำแท่งเหล็กกลมคาร์บอนต่ำ1 ชิ้น
ภาชนะเก็บเกรดอาหารภาชนะเก็บเกรดอาหาร1 ชิ้น
ตะปูเกลียวไม้ #8 x 1 นิ้วตะปูเกลียวไม้ #8 x 1 นิ้ว1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
สว่านไร้สายสว่านไร้สาย
ชุดดอกสว่านชุดดอกสว่าน
ชุดไขควงชุดไขควง
6

Wheel, board, lever and dash

Fix the notched wheel on a 12 mm steel rock shaft. Pin the connecting board to one swing bar, its slot over the shaft, so its pins meet the notches. Fix a pine lever to the rock shaft and pin its end to a hollow 18 mm food-grade tube dash stick with a leather flap valve near its top and a perforated dasher at its foot.

วัสดุสำหรับขั้นตอนนี้:

แท่งเหล็กกลมคาร์บอนต่ำแท่งเหล็กกลมคาร์บอนต่ำ1 ชิ้น
แผ่นไม้สนแผ่นไม้สน1 ชิ้น
ท่อพีวีซีท่อพีวีซี1 ชิ้น
แถบหนังแถบหนัง1 ชิ้น
สกรูเกลียวมิลสกรูเกลียวมิล1 ชิ้น
น็อตหกเหลี่ยมน็อตหกเหลี่ยม1 ชิ้น
อีพ็อกซีสองส่วนอีพ็อกซีสองส่วน1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
สว่านไร้สายสว่านไร้สาย
ชุดดอกสว่านชุดดอกสว่าน
ประแจเลื่อนประแจเลื่อน
7

The patent drawing

US 9,416, drawing sheet, public domain (expired patent).
ขั้นตอนที่ 7 - Image 1
8

Swing and make butter

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Swing the tank steadily; the dasher strokes twice each full swing. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

วัสดุสำหรับขั้นตอนนี้:

ครีมสดครีมสด2000 มล.
เกลือทะเลเม็ดหยาบเกลือทะเลเม็ดหยาบ1 ชิ้น
น้ำน้ำ1 ชิ้น

เครื่องมือที่ต้องใช้:

เทอร์มอมิเตอร์หัววัดแบบเสียบค้างเทอร์มอมิเตอร์หัววัดแบบเสียบค้าง
นาฬิกาจับเวลานาฬิกาจับเวลา
เครื่องชั่งดิจิทัลสำหรับครัวเครื่องชั่งดิจิทัลสำหรับครัว
ชามผสมสเตนเลสใบใหญ่ชามผสมสเตนเลสใบใหญ่
9

Pins that miss, a dash that sticks

Double-acting swing dash troubleshooting.

Flow

Loading...
10

History and honest limits

**William F. Davis and Nathan Davis** of Castleton, Rutland County, Vermont, received US 9,416, dated 23 November 1852. Their standards were 2 by 1 inches, 3½ feet long, spread three feet at the bottom, pairs 15 inches apart; the swing board was 13 by 14 inches; the dash stick's hole was ⅝ inch. They claimed the combination of the swing, slotted board, wheel, rock shaft and lever producing two motions of the dash from one oscillation. **Honest limits.** A smaller frame, a container and printed parts stand in for theirs; their swing length is estimated. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

วัสดุ

14

เครื่องมือที่จำเป็น

11

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...